© Pakorn Khantiyaporn | Dreamstime.com
Fall protection and construction

Fall Protection Citation Prevention — Part 1

Aug. 4, 2023
An overview of OSHA’s fall protection requirements

No matter how agile you are, a fall can happen. Your foot slips on some lubricant that wasn’t supposed to be there, a load shifts, a guard rail wasn’t properly secured, or you were off balance for just a moment. An employee at elevation is an employee who can fall from that elevation. It doesn’t take much elevation for a fall to have severe consequences.

Why, aside from the human toll, is fall protection of particular importance to company executives, managers, and supervisors? OSHA writes more citations for fall protection than for any other safety category. The “General Requirements” part of the fall protection requirements has been in the number one spot for the past 12 years in a row.

Last year, the training requirements for fall protection took eighth place. Ladders and scaffolding took fourth and fifth place, respectively. So, of the top ten OSHA citation categories, four are related to “death by sudden deceleration against the ground.” These rankings indicate a widespread apathy to the likelihood of a fall from elevation and the often tragic consequences of being unprepared when it happens.

If you look for “fall protection” in the index of the OSHA Construction Industry Regulations & Standards [29CFR1926], you will see the first entry in bold. This takes you to 1926.954 personal protective equipment, and it’s part of Subpart V – Power Transmission and Distribution. The requirements for fall protection PPE are in 1926.954(b). It takes about two pages of text. Employers must comply with all of this, just for the PPE.

Below that first bolded entry in the index is a long list. Of particular interest to safety directors in the electrical space are the following:

  • General Requirements 1926.501(a)
  • Personal Fall Arrest Systems 1926.502(d)
  • Safety Net Systems 1926.502(c)
  • Training Program 1926.503(a).

We’ll explore these and other subtopics of fall protection more in-depth as this series progresses. If you want to binge-read ahead, just go to Subpart M of the OSHA regs. It runs from page 327 (2021 edition) through page 342.

While we’re framing this series as how to protect your company from being cited by OSHA, the real goal of course is to protect your employees from losing a contest with gravity.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Chapter 9 of the NEC — Part 5

Calculating voltage drop with help from Table 8.

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...