ID 328427725 © Melpomenem | Dreamstime.com
dreamstime_xxl_328427725

Code Conversations Podcast — Emergency Disconnects in the 2023 NEC

Oct. 21, 2024
This episode looks at what's new with emergency disconnects in the 2023 edition of the Code.
ID 102914000 © Designer491 | Dreamstime.com
dreamstime_m_102914000

EC&M On Air Highlights How to Choose Electrical Estimating Software

Oct. 14, 2024
ICYMI, Episode 55 features an audio-only version of Don Kiper's informative EC&M Asks video.
ID 217162846 © Spaxia | Dreamstime.com
dreamstime_xxl_217162846

Code Conversations Podcast — Rusted Raceway Hanging by a Thread

Oct. 7, 2024
Ellen and Russ talk about the importance of the environment in which electrical equipment is installed.
ID 134311330 © | Dreamstime.com
dreamstime_m_134311330

EC&M On Air — The 2024 Top 50 Execs Talk Electrical Industry Market Trends

Sept. 23, 2024
Executives from some of this year's Top 50 electrical contractors share insights on current market trends, including hot/cold markets, EV charging station development, and more...
ID 96319867 © Carmenmurillo | Dreamstime.com
dreamstime_xxl_96319867

Code Conversations Podcast — Section 210.8(D) Specific Appliances in the 2023 NEC

Sept. 16, 2024
Ellen and Russ look at Sec. 210.8(D) regarding specific appliances.
ID 87058542 © ibreakstock | Dreamstime.com
dreamstime_m_87058542

EC&M On Air Highlights The Difference Between NEC and OSHA Electrical Requirements with Eddie Guidry

Sept. 9, 2024
ICYMI, Episode 53 covers an audio-only version of a Q&A video on what is "approved" and "acceptable" in the NEC vs. OSHA.
ID 96245048 © Carmenmurillo | Dreamstime.com
Id 96245048 © Carmenmurillo | Dreamstime

Code Conversations Podcast — Vending Machine Installation Do’s and Don’ts

Sept. 2, 2024
Ellen and Russ discuss Sec. 406.9 of the NEC.
ID 325877022 © Ruslan Batiuk | Dreamstime.com
dreamstime_m_325877022

EC&M On Air — Meet the 2024 EC&M Product of the Year Winners!

Aug. 26, 2024
Learn more about the three products that secured the top spots for this year's POTY competition: Eaton's KwikRail cable tray, Lex Product's PowerRACK for outdoor use, and ABB'...
ID 167081576 © Tulipdesign18 | Dreamstime.com
code conversations august

Code Conversations Podcast — NEC Revisions to GFCI Protection of Receptacles in Dwelling Units

Aug. 19, 2024
Ellen and Russ discuss several revisions to NEC Sec. 210.8(A) for GFCI protection of receptacles in dwelling units.
ID 328427725 © Melpomenem | Dreamstime.com

EC&M On Air Highlights Tips for Choosing a Third-Party Electrical Estimator

Aug. 12, 2024
In Episode 51, we're featuring an audio-only version of an EC&M Asks video featuring Don Kiper, electrical estimating expert.
Photo 317937110 © Andrei Diachenko | Dreamstime.com

Code Conversations Podcast — Corrosion and Deterioration Considerations

Aug. 5, 2024
Ellen and Russ talk about protecting equipment against corrosion and deterioration.
Photo 87058542 © ibreakstock | Dreamstime.com

EC&M On Air — Meet the 2024 30 Under 30 Electrical All Stars

July 22, 2024
In Episode 50, Ellen Parson introduces a few of this year's 30 Under 30 honorees, including Jose Alvarez, Khalid Hachil, Sierra English, and Hazen Ring.
Photo 107010476 © Carmenmurillo | Dreamstime.com

Code Conversations Podcast — Section 680.5 GFCI and SPGFCI Protection in the 2023 NEC

July 15, 2024
Ellen and Russ discuss Sec. 680.5 Ground-Fault Circuit-Interrupter (GFCI) and Special Purpose Ground-Fault Circuit-Interrupter (SPGFCI) Protection.
Photo 313954605 © Malkiapsarastock | Dreamstime.com

EC&M On Air Highlights Determining Blast Radius for Debris During an Arc Flash with Tommy Northcott

July 8, 2024
Episode 49 features a Q&A on arc flash safety, calculating the blast radius for debris, and what happens when you neglect maintenance on electrical equipment.
Illustration 120260425 © Ivan Soima | Dreamstime.com

Code Conversations Podcast — Bird Brained Weatherhead Worries

July 1, 2024
Ellen and Russ talk about Sec. 230.