Photo 141772842 Flynt Dreamstime 654407be6237c

Code Conversations Podcast — Breaking Down Barrier Requirements

Nov. 6, 2023

Ellen and Russ talk about whether duct seal can be used to cover supply-side terminals.

In this episode of EC&M Code Conversations, Editor-in-Chief Ellen Parson and Code Consultant Russ LeBlanc talk about whether duct seal can be used to cover the supply-side terminals to comply with Sec. 230.62(C) barrier requirements.

“Code Conversations” is a podcast series from EC&M magazine that focuses on interpreting the NEC. Ellen Parson, editor-in-chief of EC&M, and NEC Expert Russ LeBlanc discuss difficult-to-decipher concepts surrounding the 2023 NEC in 10 minutes or less.

About the Author

Russ LeBlanc | Owner

Russ started in the electrical trade as an apprentice in 1985. He worked his way up to become a Journeyman Electrician and then eventually became a Master Electrician and Licensed Construction Supervisor. In 1999 Russ become an Electrical Instructor for The Peterson School of Engineering in Massachusetts where he developed his passion for teaching, and quickly became Department Head of Electrical Instruction. Russ has taught thousands of apprentices, electricians, engineers, inspectors, and other electrical professionals during his career as an instructor. He continues to provide electrical professionals with Electrical Code seminars, Arc-Flash Awareness training seminars and educational material through his LeBlanc Consulting Services in North Reading, MA whose specialty is educating electricians. He has been an active member of the NFPA Electrical Section and has authored hundreds of National Electrical Code proposals and comments which have become Code rules to improve the safety for the electrical industry. Russ is also an IAEI certified Electrical Inspector.

Please visit www.russleblanc.net for more information.