The U.S. healthcare sector is as mission-critical as it gets, not only as a $1 trillion-plus economic business but in the basic humanity at the heart of the industry, no matter how big it gets.
The nation’s healthcare facilities typically have relied on utility grid power and, worst-case scenario, backup diesel generators to keep the power on so that medical care is never rationed or threatened by time or temperature. Increasingly, the healthcare sector is exploring controlled on-site power solutions such as microgrids to maintain that mission-critical power resiliency while also aiming for cleaner air through sustainable energy generation.
On Wednesday, April 16 at 10:45 AM CT, the Microgrid Knowledge Conference will host a key session on “Lessons Learned from Healthcare Microgrids.” The session will feature a panel of leading experts in both healthcare energy and project development.
The session chair is Rame Hemstreet, chief energy officer and vice president of operations, national facilities design, and construction at Kaiser Permanente, the largest healthcare management firm in the U.S. Hemstreet is also a member of the Microgrid Conference advisory board.
Joining him will be Jesus Mena, senior project engineer at microgrid developer Ameresco; Jamie Schnick, senior electrical engineer in the building standards unit at the California Department of Health Care Access and Information’s Office of Statewide Hospital Planning and Development; Rocky Tanner, a principal on consulting firm RTM who has helped develop some of the first skilled nursing facility microgrids in California; and Duc Bui, a principal at project consulting firm Salas O’Brien.
These panelists plan to enlighten the audience on how operational microgrids have impacted healthcare facilities, reduced carbon footprints, and lowered energy costs, among other benefits.
As a precursor to the live event, we asked the panelists several questions on the needs and challenges facing the healthcare sector as they consider or install on-site microgrids. Here’s what each had to say on the subject.
1) There’s a popular saying in the industry that “If you’ve seen one microgrid, you’ve seen one microgrid.” These types of coordinated on-site power assets are not one size fits all and can be problematic throughout the project phase. What is the main component of a microgrid development project that is challenging specifically in the healthcare facility industry?
Jamie Schnick, California Department of Healthcare: “The use of various types of on-site energy producers and sizing of these units will need to be carefully selected and configured to provide power quality levels sufficient to optimize patient care spaces like diagnostic imaging suites and operating theatres. These spaces have state-of-the-art equipment that can be very sensitive to power fluctuations or disturbances. Before the use of microgrids, maintaining sufficient power quality was mainly an electric utility issue, by implementing microgrids the responsibility to maintain sufficient power quality levels will transfer to the engineers and operators of these systems. Hospitals typically have large motors, and imaging machines which may have high inrush currents, that can negatively impact the power quality if not designed correctly.”
Jesus Mena, Ameresco: “There are many challenges that come with the design of a microgrid in a healthcare facility. Designing standalone photovoltaic (PV) systems or standalone energy storage systems is difficult but combining them amplifies their complexities and introduces a new challenge, configurable controller systems. The energy storage controller or charge controller is the “brain” that controls the dispatch of production, and transfer of loads and configures the daily energy production variations. Designing the controller that will maintain the sequences of operations for the microgrid proves to be particularly challenging when you need to coordinate multiple distributed generation (DG) sources as well as maintain existing backup sources such as generators.”
Rame Hemstreet, Kaiser Permanente: “There are two inter-related challenges: 1) properly sizing the microgrid to maximize economic benefit and avoid NEM, and 2) developing the avoided cost analysis over the lifetime of the microgrid—in other words how much will the facility pay for power over the next 15-20 years without a microgrid. This also highlights an advantage of a microgrid: reduced risk. The cost of grid power 5, 10, or 15 years from now is (anyone’s guess), while the cost of a solar+storage microgrid can be precisely calculated.”
2) Hospitals have traditionally relied on backup generators. How have the choices in on-site power sources evolved in recent years and what’s driving those changes?
Mena: “The evolution of energy generation and resources to generate energy has been impacted by the influence of the distribution utility limitations. It is an unfortunate reality that there are natural factors that are out of human control and affect the production of energy needed for critical facilities like hospitals. In locations like California, for example, there are imminent wildfire threats that promote the electric utility to shut down power (Public Safety Power Shutoffs), increasing the need for distributed generation. Furthermore, sources like backup generators need a constant supply of fuel to comply with a minimum number of hours of energy backup, and during natural disaster events, this limitation can be disastrous. By having distributed generation, you eliminate the need for fuel supply and circumvent challenges such as transportation, road access, and supply logistics.”
Hemstreet: “Health care services are also delivered from medical office buildings/clinics that often have little or no backup power. Microgrids add resiliency as well as cost savings for these facilities. For hospitals, they can reduce costs and GHG emissions.”
Schnick: “Most hospitals in California, existing and new, have cost constraints and limited space for siting equipment. The recent code changes that permit healthcare microgrids to serve as Essential Power Sources allow owners to explore the options of spending money on green energy producers in lieu of a full complement of emergency generators. This could reduce or even eliminate the need for emergency generators, which would transfer the cost to equipment that operates 24/7 and might provide additional benefits, beyond resilience, such as lower operating costs. Just as important as the potential cost savings is the space that could be repurposed. Ideally, the on-site green energy producers could be sited in the spaces previously reserved for emergency generators.”
3) Lessons learned from healthcare microgrid projects which showed the way forward?
Duc Bui, Salas O’Brien: “Get the power company approval process started early and have their commitment and cooperate fully on the project. Demonstrate the reliability and the flexibility of the microgrid and ensure that the life safety, critical, and essential electrical systems are protected by emergency power source; Get all stakeholders (e.g., owner, facility engineering, general contractor, electrical contractor, mechanical engineers, mechanical contractor and the mechanical control contractor and the commissioning agent) to participate with the team on the project. Perform the functional test and commissioning of the system. Provide training to the facility engineers on the operation and testing of the system.”
4) Healthcare has so much to worry about and get right. Why is energy so important to the sector?
Schnick: “There are many challenges regarding electrical power for healthcare facilities in California as we strive to be more sustainable. First, California's energy costs are higher compared to other parts of the country. Second, wildfires and public safety power shutdowns (PSPS) have resulted in more frequent and longer-duration power outages than in years past. Third, there are concerns regarding sufficient grid capacity to support new healthcare construction. Either the upgrades to the grid infrastructure are more extensive and costly and/or multiple years out. We can hope for the best but need to plan for the continued worsening of these conditions. Healthcare microgrids provide an option to improve on all three of these areas sustainably.”
Mena: “Energy is a crucial factor for any industry, and for healthcare facilities that operate 24/7 with life support energy demands, this is not an exception. Healthcare establishments maintain critical care facilities and life support equipment that need a stable source of energy and cannot withstand “blips” in the energy distribution. It is critical that healthcare facilities operate under an exemplary energy system with sustainable production.”
Hemstreet: “It is impossible to provide modern healthcare services without power. While utilities constitute less than 1% of operating costs, their reliability is paramount.”
The Microgrid Knowledge Conference will cover many forms of microgrids in the commercial, industrial, and mission-critical sectors. Check out the full agenda.