Code Quiz of Day

Conductors for an appliance circuit supplying more than one appliance or appliance receptacle in an installation operating at less than 50V shall not be smaller than _____ AWG...

Mounting Height Requirement for EV Coupler

June 19, 2015

Unless specifically listed and marked for the location, the _____ of electric vehicle supply equipment shall be stored or located at a height of not less than 24 in. above the...

Protecting Cellular Metal Floor Raceways

June 18, 2015

Inserts for cellular metal floor raceways shall be leveled to the floor grade and sealed against the entrance of _____.

Working Space Requirements for Electric Sign Equipment

June 17, 2015

A working space not less than 3 ft high by 3 ft wide by ______ deep is required for each ballast, transformer, electronic power supply, and Class 2 power source where not installed...

Location of Emergency Controls at Attended Self-Service Motor Fuel Dispensing Facilities

June 16, 2015

A/C Equipment Disconnecting Means Requirements

June 15, 2015

Definition of Child Care Facility

June 12, 2015

ENT Marking Requirements

June 11, 2015

Fulfilling Conductor Fill Requirements

June 10, 2015

When counting the number of conductors in a box, a conductor running through the box with an unbroken loop or coil not less than twice the minimum length required for free conductors...

Guarding of Live Parts

June 9, 2015

Entrances to rooms and other guarded locations containing exposed live parts shall be marked with conspicuous ______ forbidding unqualified persons to enter.

Identification of Grounded Conductor

June 8, 2015

Grounded conductors ______ and larger can be identified by distinctive white or gray markings at their terminations.

Attachment Height of Overhead Service Conductors

June 5, 2015

The minimum point of attachment of overhead service conductors to a building shall not be less than ______ above finished grade.