Moving Violations Video No. 51, by Russ LeBlanc, NEC Consultant: Handle Tie

Discuss this Video 1

Anonymous (not verified)
on Jul 19, 2013

Nothing new here Russ, I've seen cotter pins, 6D nails, and coat hanger wire used as a handle tie in my years as an electrician. Many times one breaker was tripped instead of both with these types of non UL handle ties. Dangerous.

Please or Register to post comments.

Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Sep 10, 2015

ON DEMAND: An Effective Electrical Safety Program that Delivers

This hour-long webinar will cover the wording in various IEEE recommended practices, NFPA 70E and ANSI Z10 with an emphasis on what it means in terms of designing, implementing and managing an Effective Electrical Safety Program....More
Jul 21, 2015

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×