Moving Violations Video No. 43, by Russ LeBlanc, NEC Consultant: Fusible Switch

Discuss this Video 2

Paul Dunphy (not verified)
on Mar 7, 2013

Hello Russ,
Check 70E requirements for LO/TO and PPE before exposing yourself to shock and arc flash.
Also see NEC 110.16.
You may want to think about a re-do of the video.
Be safe,
Paul

Russ LeBlanc (not verified)
on Mar 7, 2013

Paul, thanks for reminding us about shock and arc-flash hazards.

I made sure to de-energize the power feeding this disconnect and verify absence of voltage on the feeder before I opened it.
That is standard procedure for any of my videos or photos where I have to have a panel open or when I'm near other exposed energized parts.

Russ

.

Please or Register to post comments.

Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Nov 9, 2016
Webinar

Technology Enabled Data Center Life Cycle Services

This webinar will discuss the benefits of cloud connected data center monitoring, different levels of monitoring and the potential effects on availability and efficiency....More
Nov 2, 2016
Webinar

There is More to a Data Center than White Space; A Holistic Approach to Facility Monitoring and Control

This webinar will discuss the benefits of cloud connected data center monitoring, different levels of monitoring and the potential effects on availability and efficiency....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×