Moving Violations Video No. 43, by Russ LeBlanc, NEC Consultant: Fusible Switch

Discuss this Video 2

Paul Dunphy (not verified)
on Mar 7, 2013

Hello Russ,
Check 70E requirements for LO/TO and PPE before exposing yourself to shock and arc flash.
Also see NEC 110.16.
You may want to think about a re-do of the video.
Be safe,

Russ LeBlanc (not verified)
on Mar 7, 2013

Paul, thanks for reminding us about shock and arc-flash hazards.

I made sure to de-energize the power feeding this disconnect and verify absence of voltage on the feeder before I opened it.
That is standard procedure for any of my videos or photos where I have to have a panel open or when I'm near other exposed energized parts.



Please or Register to post comments.

Electrical Testing Feed

EC&M Webinars
Jul 21, 2015

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
Jul 14, 2015

ON DEMAND: Understanding the 2015 Edition of NFPA 70E and the Arc Flash Hazard

Get more information on the important changes to the 2015 edition of NFPA 70E. More specifically, this event will address hazard analysis and FR clothing performance testing, focusing on the quantification of incident energy and ATPV (or Arc Rating)....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×