Moving Violations Video No. 32, by Russ LeBlanc, NEC Consultant: Corrosion Protection Requirements

Discuss this Video 1

Mike Lamond (not verified)
on Sep 27, 2012

I once had a project at a refrigeration plant which used ammonia as the circulating fluid to the cooling load. After more than 20 years of exposure to ammonia fumes and water, all of the rigid conduits that came out of the concrete floor ended 8-10 inches above the floor. The exposed conductors simply continued through the gap, possibly by force of habit.

Please or Register to post comments.

Electrical Testing Feed

EC&M Webinars
Sep 10, 2015

ON DEMAND: An Effective Electrical Safety Program that Delivers

This hour-long webinar will cover the wording in various IEEE recommended practices, NFPA 70E and ANSI Z10 with an emphasis on what it means in terms of designing, implementing and managing an Effective Electrical Safety Program....More
Jul 21, 2015

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×