advanced search

The basics of solid-state devices.

Jul 1, 1995 12:00 PM, DeDad, John A.

Another workhorse of electronic equipment is the transistor. There are two types of transistors commonly used: PNP and NPN. As shown in Fig. 1, the PNP transistor consists of a thin layer of N-type material between two layers of P-type material. The NPN transistor has the opposite: a thin layer of P-type material between two layers of N-type material. (See April 1995 Back To Basics for information on P-type and N-type materials.) Also shown in Fig. 1 are the symbols used for these two types.

Transistors have three terminals: an emitter (E), a base (B), and a collector (C). These terminals have identical locations for both types of transistors. Note that the PNP transistor symbol has an arrow called the transmitter arrow pointing toward the base while an NPN transistor has the transmitter arrow pointing away from the base. In both types, however, the transmitter arrow points away from the P-type material and towards to the N-type material.

Terminal arrangement

Transistors are available with two or three leads extending from their case. If you need a specific shaped transistor, you specify a transistor outline (TO) number. Fig. 2. shows typical TO number configurations. Note that the TO-3 configuration has only two leads or terminals. Many times, the transistor's metal case is used as the C lead.

You can identify specific leads by their spacing. For example, as shown in Fig. 3, the E and B leads are usually close together, while the C lead is farther away. Also, the B lead is always in the middle.

Sometimes, transistors come with index pins, as shown in Fig. 4. To identify terminals on such transistors, start with the lead closest to the index pin and work clockwise. The first lead is always the E lead; the B lead (always closest to the E lead) is next, and the C lead is last.

Transistor junction biasing

The base-emitter junction in a transistor circuit must always be foward biased while the base-collector junction must always be reverse biased. (See April 1995 Back To Basics for discussion of forward and reverse biasing.) Fig. 5 shows the base-emitter junction of an NPN transistor. Note that the bias voltage is connected so that the positive terminal connects to the base (P-type material) and the negative terminal connects to the emitter (N-type material). Thus, we have a forward biased base-emitter junction, with current flowing in the external circuit as shown.

As shown in Fig. 6, the base-collector junction has the bias voltage connected so that the negative terminal connects to the base (P-type material) and the positive terminal connects to the collector (N-type material). These connections reverse-bias the base-collector junction. This results in a very small amount of current (basically leakage current) to flow in the external circuit. This is identical to that of a reverse-biased semiconductor diode.

Voltage in a transistor

There are certain voltages in the base circuit of a transistor. Looking at Fig. 7, we see a bias voltage ([V.sub.BB]) applied to a transistor's base-emitter circuit, a voltage drop ([V.sub.BE]) across the base-emitter junction, and another voltage drop ([V.sub.R1]) across a series-limiting resistor ([R.sub.1]). Most of [V.sub.BB] will be across [R.sub.1] because the resistance of the base-emitter junction is less than that of [R.sub.1].

There are other voltages associated with transistors, namely those in the collector circuit. As shown in Fig. 8, we have a bias voltage ([V.sub.CC]) applied across the emitter-collector circuit. This voltage will be divided between the emitter-base and collector-base junctions, based on their individual resistances, because these junctions are in series with each another. The voltage across the collector and emitter is [V.sub.CE] and the voltage across the collector and base is [V.sup.CB]. [V.sup.CB] is greater than [V.sub.CE] because the collector-base junction has a much greater resistance than the base-emitter junction. However, base voltage [V.sub.CB] is greater than base-emitter voltage [V.sub.BE].

Want to use this article? Click here for options!

© 2012 Penton Business Media, Inc.

---

Acceptable Use Policy blog comments powered by Disqus

Browse Back Issues Select an Issue November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 1, 2009 December 2008 November 2008 October 1, 2008 September 2008 August 2008 July 2008 June 1, 2008 May 2008 April 2008 March 2008 February 2008 January 2008 December 2007 November 2007 October 2007 September 2007 August 2007 July 2007 June 2007 May 2007 April 2007 March 2007 February 2007 January 2007 December 2006 November 2006 October 2006 September 2006 August 2006 July 2006 June 1, 2006 May 1, 2006 April 2006 March 1, 2006 February 2006 January 2006 December 2005 November 2005 October 2005 September 2005 August 2005 July 2005 June 2005 May 2005 April 2005 March 2005 February 2005 January 2005 December 2004 November 2004 October 2004 September 2004 August 2004 July 2004 June 2004 May 2004 April 2004 March 2004 February 1, 2004 January 1, 2004 December 1, 2003 November 1, 2003 October 1, 2003 September 1, 2003 August 1, 2003 July 1, 2003 June 1, 2003 May 1, 2003 April 1, 2003 March 1, 2003 February 1, 2003 January 1, 2003 December 1, 2002 November 1, 2002 October 1, 2002 September 1, 2002 August 1, 2002 July 1, 2002 June 1, 2002 May 1, 2002 April 1, 2002 March 1, 2002 February 1, 2002 January 1, 2002 December 1, 2001 November 1, 2001 October 1, 2001 September 1, 2001 August 1, 2001 July 1, 2001 June 1, 2001 May 1, 2001 April 1, 2001 March 1, 2001 February 1, 2001 February 1, 1995 January 1, 2001 December 1, 2000 November 1, 2000 October 1, 2000 September 1, 2000 August 1, 2000 July 1, 2000 June 1, 2000 May 1, 2000 April 1, 2000 March 1, 2000 February 1, 2000 January 1, 2000 December 1, 1999 November 1, 1999 October 1, 1999 September 1, 1999 August 1, 1999 July 1, 1999 June 1, 1999 May 1, 1999 April 1, 1999 March 1, 1999 February 1, 1999 January 1, 1999 December 1, 1998 November 1, 1998 October 1, 1998 September 1, 1998 August 1, 1998 July 1, 1998 June 1, 1998 May 1, 1998 April 1, 1998 March 1, 1998 February 1, 1998 January 1, 1998 December 1, 1997 November 1, 1997 December 1, 1996 November 1, 1996 October 1, 1996 September 1, 1996 August 1, 1996 July 1, 1996 June 1, 1996 May 1, 1996 April 1, 1996 March 1, 1996 February 1, 1996 January 1, 1996 December 1, 1995 November 30, 1995 November 1, 1995 October 1, 1995 September 1, 1995 August 1, 1995 July 1, 1995 June 1, 1995 May 1, 1995 April 1, 1995 March 1, 1995

browse e-newsletters