Quizzes

Code Quiz: Connection of Luminaires

Thu, 23 May 2013 21:19:00 +0000

By Steven Owen, National Code Seminars

NEC rules on connecting luminaires

Code Quiz: Calculating Lighting Loads

Thu, 09 May 2013 16:07:00 +0000

By Steven Owen, National Code Seminars

NEC rules on calculating inductive and LED lighting loads for circuits supplying lighting units that have ballasts, transformers, autotransformers, or LED drivers

Code Quiz: Circuit Connections for Fixed Electric Heating Systems

Thu, 18 Apr 2013 21:05:00 +0000

By Steven Owen, National Code Seminars

NEC requirements for circuit connections on fixed electric heating systems

Code Quiz: Pull Boxes for Fixed Electric Heating Systems

Thu, 04 Apr 2013 16:28:00 +0000

By Steven Owen, National Code Seminars

NEC requirements regarding pull boxes for fixed electric heating systems

Code Quiz: Grounding Requirements for Switches

Thu, 21 Mar 2013 15:41:00 +0000

By Steven Owen, National Code Seminars

NEC guidelines on grounding requirements for switches

Code Quiz: Snap Switches

Wed, 06 Mar 2013 21:48:00 +0000

By Steven Owen, National Code Seminars

NEC guidelines on snap switches

Code Quiz: Definition of Patient Bed

Thu, 21 Feb 2013 16:48:00 +0000

By Steven Owen, National Code Seminars

NEC guidelines on the definition of a patient bed and when a table is considered to be a bed location

Code Quiz: Name That Article

Thu, 07 Feb 2013 15:36:00 +0000

By Steven Owen, National Code Seminars

Which Article of the 2011 NEC consists of only two sections, uses the word "specific" in the title, and makes reference to seven other Articles in the Scope statement?

Code Quiz: Position of Receptacle Faces

Thu, 17 Jan 2013 21:01:00 +0000

By Steven Owen, National Code Seminars

Fill in the blank with the appropriate answer.

Excluding any exception(s), after installation, receptacles __________ faceplates of insulating material, and shall project a minimum of 0.015 in. from metal faceplates.

Code Quiz: Mounting Receptacles

Thu, 03 Jan 2013 17:56:00 +0000

By Steven Owen, National Code Seminars

When mounting receptacles in boxes that are set back from the finished surface as permitted in 314.20, the receptacles shall be installed so that the mounting yoke or strap of the receptacle is _________ .