More in NEC

  • Luminaire Let Down
    Mar 5, 2014
    Video
    Electrical Construction and Maintenance

    Moving Violations Video No. 67, by Russ LeBlanc, NEC Consultant: Luminaire Let Down 1

    In this episode, EC&M Magazine's Russ LeBlanc, finds a luminaire that was improperly wired when it was first installed. He shows us the fire hazard that was created when the installer chose to ignore the manufacturer's wiring instructions. This is a violation of Section 110.3 of the NEC....More
  • Moving Violations Video No. 66, by Russ LeBlanc, NEC Consultant: Boston
    Feb 20, 2014
    Video
    Electrical Construction and Maintenance

    Moving Violations Video No. 66, by Russ LeBlanc, NEC Consultant: Boston Back Wrap

    In this episode, Russ notes a few Code violations in this 4-inch box, which relate to equipment grounding conductor termination points....More
  • Moving Violations Video No. 65, by Russ LeBlanc, NEC Consultant: Wet & Wild Rece
    Feb 5, 2014
    Video
    Electrical Construction and Maintenance

    Moving Violations Video No. 65, by Russ LeBlanc, NEC Consultant: Wet & Wild Receptacle

    In this episode, Russ points out the dangers associated with a poorly installed receptacle and notes how it violates Section 110.12(B) of the 2014 NEC....More
Electrical Testing Feed

EC&M Webinars
Jul 21, 2015
Sponsored

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
Sep 10, 2015
Sponsored

An Effective Electrical Safety Program that Delivers

This hour-long webinar will cover the wording in various IEEE recommended practices, NFPA 70E and ANSI Z10 with an emphasis on what it means in terms of designing, implementing and managing an Effective Electrical Safety Program....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×