The 20V MAX* lithium cordless drill with AutoSense Technology features an automatic clutch that is three times more accurate than a mechanical clutch, according to the company. When in drive mode, a microprocessor continuously measures the tool’s performance. As the screw enters the material, there is a rapid change in its torque profile. The microprocessor analyzes the rate of change and stops most screws flush with the material within
3 msec. To countersink screws, the tool provides depth control for micro adjustments. In drill mode, the tool features combined power of the battery and a 0 rpm to
800 rpm motor. Highlights include a battery status indicator and an LED work light on the foot of the product.
The EOL3-277-20KA Series of surge protectors includes an LED indicator that lights up when the unit reaches end-of-life. The indicator also flashes at power-up to confirm that the LED is functioning.
In-line fusing shuts down the LED luminaire to protect it until the surge protector is replaced. Offered in two models, one version includes a local LED indicator on the unit, while one is designed to operate a remote indicator that can be mounted elsewhere on the luminaire. A remote LED indicator is available with 18-in. leads. In addition, these devices are designed to be used for luminaires on electrical mains up to 277V, are rated to protect from surges up 20,000A, and feature UL1449-recognized components.
Thomas Research Products
Cabor work boots feature EXP technology to help fight fatigue. Made from dual layer foam, EPX features a dense base that distributes weight evenly, a honeycomb heel pattern that expands to absorb impact, a ribbed spine in the forefoot, and a compression-molded EVA top layer. Features include: metal hardware, waterproof membrane, and slip-resistant rubber lug outsole. Offered in a moc-toe chukka, 6-in. boot, 8-in. boot, and Wellington styles, all boots are EH-rated.
The Flip Joint is a 3-in-1 tool that allows users to cut with the cable cutter, slice with the sheath knife, and strip vinyl-coated wires with the wire stripper. The 8-in. tool cuts through vinyl-coated cable or bare, multi-stranded copper or aluminum wire up to size 10/3. Designed with industrial-grade plastic dipped grips, the smart contour handles provide comfort while cutting and slip resistance while slicing.
The surge-trap pluggable (STP) DIN-rail SPD line now includes UL 1449 3rd Edition recognized ratings up to 690VAC for 3-phase WYE configurations. The UL- and IEC-certified SPDs feature TPMOV technology inside, which delivers fail-safe protection to the installation and doesn’t require additional overcurrent protection upstream. The STP6903PYGM model is for 3-phase WYE without N-G protection while the STP6903PYM is for 3-phase WYE including N-G protection. Each is equipped with a visual and remote status indicator to signal product end-of-life.
Made of 100% copper-based alloy that poses no threat to human health, EPA-registered CuVerro antimicrobial copper surfaces now include a toggle switch option. Laboratory testing has shown that, when cleaned regularly, these surfaces deliver continuous and ongoing antibacterial action, effective in killing more than 99.9% of bacteria within 2 hr. Features include a professional medical grade appearance that is tarnish resistant.
Eaton Cooper Wiring
The GXP1828RF Super-Clamp is a multifunctional, range-taking grounding connector for connecting cables in parallel or cross configurations. The tool is cULus-listed for use with rebar sizes No. 7 to No. 12 (7/8 in. to 1½ in. diameter). The connector can accept one or two wires of wire range No. 6 solid to 4/0 stranded. The product also can be used on round or square pedestals (round: 7/8 in. to 2 in.; square: ¾ in. to 1½ in.) in parallel or cross-grid patterns.
Exact punches and dies, M18 Force Logic knockout tools, and a hand ratchet set comprise the company’s latest knockout system. The punches and dies feature bold, laser-engraved crosshairs and a clear view of the work surface to facilitate alignment. In addition, they cover both mild and stainless applications up to 4 in., are designed for optimal slug removal, and are compatible with competitive knockout tools. The M18 10-ton knockout tool features a hydraulic system to punch up to 4-in. holes in 12-gage stainless steel, while the hand ratchet features 5° ratcheting that requires less clearance to punch and a 20% longer handle than the competition.
Featuring a 25° comfort angle, this product offering includes German-made Orbis long-nose pliers, a diagonal cutter, angled combination pliers, and a cable cutter. The 8-in. long-nose pliers feature three different sized pulling grooves while the 7½-inch combination pliers include serrated tips. For continuous use, the 7-in. diagonal cutter has a high-leverage design that the company says allows for 30% more cutting power. The 8¾-in. cable cutter produces clean cuts on aluminum cables, single and multiple wires, including soft copper up to 2/0 AWG without crushing or deformation.
Sapphire LED downlights feature Comfort Dim, a warm lumen level that creates a candlelight ambiance by color tuning the temperature from 2,700K to 1,800K. The series includes 4-in., 6-in., and 8-in. apertures with 850-lm, 1,250-lm, 2,000-lm, 3,000-lm, and 4,000-lm packages. Offered in 2,700K, 3,000K, 3,500K, and 4,000K color temperatures, the products are cULus-listed for wet locations, are specifiable in 120V and 277V, and have a 10-yr limited warranty.
This line of heavy-duty safety switches meets the necessary UL98, CSA, and NEMA KS-1 standards for service entrance and motor load applications. The 600V and 200kA rated switches use the same globally rated bodies as the company’s rotary-style switches. Features include touch-safe visible blades and operating mechanisms that are fully enclosed and protected from dirt and debris. All enclosure types come with gaskets, are free of sharp edges, and offer a spacious interior. Offered from 30A to 1,200A, the products are available as fused and non-fused, with Types 1/12/3R/4X steel or stainless steel enclosures.
These heat- and dirt-resistant NEMA 12 cabinet coolers keep electrical enclosures cool with 20°F (-7°C) air. Offering cooling capacity of up to 275 Btu/hr, the UL-listed and CE-compliant units mount through a standard electrical knockout while maintaining the NEMA 12, 4, or 4X rating of the enclosure. Featuring an automatic drain filter separator to ensure no moisture passes to the inside of the electrical enclosure, an optional thermostat control minimizes compressed air use and keeps the enclosure at ± 2°F of the setting.
This series of pre-fab box and conduit hanger support (BCHS) plates has been expanded to include four models — BCHS-6, BCHS-6S, BCHS-10, and BCHS-12. Designed to allow for safer installation of hanging boxes, the line includes configurations for larger boxes (6 in. × 6 in. and 12 in. × 12 in.) and horizontal and vertical mountings. All plates include stamped markings that provide installation guidelines. No cutting is required, and pin holes and slots allow for the use of conduit straps.
Kopex-Ex SWA/SWB cable glands terminate steel wire armored (SWA) and steel wire braid (SWB) cable. Suitable for use in oil and gas processing and marine environments, the cable glands are designed for low-smoke, halogen-free, and flame-retardant applications. In addition, the products can operate in temperatures up to 194°F (90°C).
Thomas & Betts
The DET4TC2, DET4TCR2, DET4TD2, and DET4TR2 four-terminal earth/ground resistance and soil resistivity testers have been added to the company’s DET4 Series. The DET4TC2 and DET4TCR2 include attached rod technique (ART) capability as well as stakeless (clamp-on) testing for applications where traditional fall-of-potential testing is not possible. All four models offer selectable output voltage of 25V and 50V and are rated to 100V CAT IV. DET4TC2 and DET4TCR2 models offer a resistance measurement range up to 200,000 ohms, while the DET4TD2 and DET4TR2 offer a resistance measurement range up to 20,000 ohms. All units are IP54-rated, feature a large selector switch that enables users to choose 2-, 3-, or 4-pole tests (even when wearing work gloves), and include a large, easy-to-read LCD screen and thumb-sized test button.
The Journeyman Series of gloves is designed for users who may encounter cuts, scrapes, impact injuries, and vibration injuries on a regular basis. The product line consists of six machine-washable models: Extreme, Utility, Camouflage, Cold Weather Pro, Grip, and Leather. The Extreme style features flexible yet impact-absorbing thermo plastic rubber (TPR) and EVA foam, Poron padding material in the palm, and rubberized fingertips. Utility and Camouflage gloves include moisture-wicking Trek Dry stretch material, a synthetic leather palm, and reinforced thumb and finger panels, while the Cold Weather Pro style features Thinsulate C40 lined palm and fingers, water-resistant nylon back lined with Thinsulate C100, and rubberized palm. Grip and Leather versions both offer Trek Dry stretch material along with a Neoprene cuff and soft molded rubber closure with hook and loop to secure fit.
The HDPQ line of hand-held power quality and energy instruments includes Visa, Guide, and Xplorer models. Features include: 1kV CAT III hook-up and lead management scheme for voltage and current inputs; 512 samples/cycle and 1 µs transient capture; 7-in. high-definition, wide-screen touch display; and a tablet-like GUI and intelligent AnswerModules. In addition, the units offer real-time reporting.
The Osram PermaLED high-bay luminaire provides up to 16,800 lm and a 100,000-hr life. Featuring a 2.3 in. height, the luminaire is available in 110W and 145W versions in 4,000K and 5,000K correlated color temperatures, offers an efficacy of up to 113 lm/W, and delivers between 11,000 lm and 16,800 lm. In addition, the product features an integral occupancy and photocell sensor option; offers 0V to 10V dimming down to 10%; operates on 120V to 277V, 347V, or 480V input voltages; is DLC qualified; and is listed for damp locations.
The Lunabay LED high-bay luminaire can now deliver up to 23,650 lm. Available in 12,300-lm, 18,000-lm, and 23,650-lm packages, the luminaire features a low glare optical system, offers a CRI of 68, and is available with crystal clear 22-in. refractor and aluminum 23-in. reflector options. Additional features include wattage ranging from 130W to 260W, five color temperatures, a 50,000-hr life, and an extruded aluminum thermal chimney that allows the product to operate in -40°C to 40°C environments. The top cylinder can be painted black, dark bronze, forest green, gray, platinum silver, red, or white. Custom colors are available upon request. Options include fusing, on/off control, wire guard, and either 50% or no light output when dimmed.
The HDL-LED Series is designed to replace linear fluorescent fixtures. Using marine-grade construction, conformal coated circuit boards, and a potted driver, the luminaire provides 30W, 60W, and 90W configurations, delivering 3,000 lm, 6,000 lm, and 9,000 lm, respectively. Featuring an AC or DC driver with a dimmable option, the product is ETL-listed to UL 1598 and 1598A with a pending UL 844 listing.
The LEDway high-output (HO) LED streetlight is designed for large multi-lane freeways and expressway applications, replacing high-pressure sodium (HPS) lighting up to 400W from a single platform. The luminaire features NanoOptic Precision Delivery Grid optic technology to provide highly focused, directional light at nine adjustable lumen output levels, which the company says reduces energy consumption by more than 50% compared to HPS streetlights in most roadway applications.
This month, EC&M magazine focuses on products from Black+Decker, Knipex Tool, Osram Sylvania, and more
Sponsored Introduction Continue on to (or wait seconds) ×