The VXLED26 is a 26W vaporproof luminaire that produces light output equivalent to a 200W incandescent fixture, lasts 50 times longer, uses 85% less energy, and offers a 50,000-hr life, according to the company. UL-listed for wet locations, the luminaire is available in cool, neutral, and warm color temperatures as well as in ceiling- and wall-mount options. Features include a housing made of all die-cast aluminum construction; high temperature silicone gasket; and a natural, shot-blasted aluminum finish. In addition, the product features a guard and a shock-resistant frosted globe that produces a smooth and uniform light distribution. Additional globe colors are include amber, blue, green, ruby, and opal.
This cloud service stores time and attendance records and safely transfers the data from a remote location to a centralized office. The cloud service works with the company’s wireless JobClock Hornet, the mobile PocketClock/GPS app or the JobClock/EX. Designed to quickly transfer and manage millions of time records, digital images, voice recordings, and other work-site data each day, employees can sync their time records to the service, which wirelessly delivers digital records tothe company’s TimeSummit office time and attendance software. This allows business owners to collect records from almost anywhere in the world in near real-time.
The Evolution Series switchboard is designed for use in 24/7 critical power applications. Featuring instantaneous zone-selective interlocking (I-ZSI) and waveform recognition (WFR) technologies, the switchboard provides users with a combination of full selective coordination and simultaneous arc flash protection. When responding to a fault, the product has the intelligence to tell circuit breakers to respond either immediately or as a backup, depending on the situation. Features include front access to the neutrals and ground; factory-installed splicing; a stationary 4,000A, 100%-rated main circuit breaker; remote racking devices; and expanded ratings up to 6,000A, with bus densities as low as 667A per sq in.
The EZfitt snap-in connector is designed to accommodate a range of cable sizes and type. Features include preassembled anti-short bushing and secure grounding. In addition, the product requires no pull-out, is reusable, and connects/disconnects simply by pressing the device’s buttons.
The Navion LED outdoor luminaire features the company’s AccuLED Optics system, which allows lumen output and energy consumption to be customized by the user. With efficiencies as high as 95%, the luminaire is suitable for new construction projects as well as retrofitting inefficient fixtures. The product also offers 30% to 70% energy savings when compared to typical HID models, according to the company. Features include a 60,000-hr life at 90% lumen maintenance, a choice of 10 optical packages, and five configurations that provide 3,600 lm to 22,000 lm. Designed to operate over a -40°C to 40°C temperature range, the product offers a 4,000K CCT and a 70 CRI with an optional 6,000K CCT (70 CRI) and 3,000K CCT (80 CRI) available. In addition, the device is 3G vibration rated and comes standard with 10kV dual-mode surge protection.
The Solo stand-alone lighting system for commercial pathways and residential roadways features a stainless steel mounting and luminaire design along with a support package. Designed to operate autonomously without depending on the grid or any outside wiring, the system allows users to access simple-to-use tools to estimate solar performance (hours of lighting and profile capabilities) for specific locations as well as typical spacing for various lighting applications. Featuring the company’s LB800 light bar, the batteries and controls are pre-wired and stored in a sleek enclosure that is mounted to a clear-coat silver pole.
The BCHS-10 box and conduit hanger support system features an octagonal plate that holds the metal electrical box and multiple conduit lines. Constructed from 15-gauge galvanized steel, the plate measures 10.75 in. × 10.75 in. in diameter and accommodates 4-in. and 4 11/16-in. square electrical boxes with ½-in. to 1¼-in. knockouts. In addition, up to eight lines of conduit (½ in. to 1¼ in.) can be connected to the electrical box, and the product allows conduit installation from any angle. Pre-drilled pin holes facilitate strap installation, and the octagonal plate includes pre-stamped markings to provide installation guides.
The SmartlockPro outlet branch circuit (OBC) AFCI receptacle is designed to detect and provide protection from parallel and series arc faults downstream and series arc faults upstream from its location. For enhanced safety, the receptacle features a shutter mechanism that blocks access to the contacts from most foreign objects. Features include a reset/lockout function that automatically tests the AFCI every time the RESET button is pushed in. According to the company, the device will not reset if the AFCI circuit is not functioning properly. Available in white, ivory, light almond, gray, black, and brown finishes, the product meets UL 1699A.
The 17W Pancake, 17W Eclipse, and 14W Security Light with PhotoCell are now listed on the Lighting Design Lab’s (LDL) interim qualified products list, qualifying them for rebates for 1 yr by most utility companies in the Pacific Northwest. According to the company, the products deliver a 50,000-hr L70 life, contain no mercury or hazardous materials, and operate without emitting IR and UV radiation. In addition, they offer a minimum CRI of 80, are UL- and cUL-listed for damp locations, and operate on a 120V lighting system.
The Classic PR is a rail-mounting system for mounting PV panels on pitched roofs. Featuring universal mid and end clamps, the product’s design reduces installation time on the roof, and the clamps can be used with any framed module, according to the company. Designed for portrait or landscape positioning, the PE-certified, ASCE 7-05- and IBC2006-compliant system is offered electrocoated (E-coat) and comes in 20-ft sections.
Crestron Green Light DALI ballasts feature an optional power monitoring feature that gives users the ability to measure, monitor, and manage power to each light fixture, while enabling daylight harvesting and load shedding. Operable between 120V and 277V, the ballasts support dimming for a wide range of linear fluorescent lamps from 1% to 100%.
Offered in 5,500-lm (40 LED) and 11,000-lm (80 LED) packages, the Magniluter MLED Series floodlight delivers controlled illumination with 50% to 60% energy savings and offers a 60,000-hr life, according to the company. Weighing 20 lb, features include a L90 rating, 4,800K CCT, a variety of distribution options, and beam patterns available in 3×3, 5×5, and 7×7. In addition, the luminaire is IP65-rated and UL 1598-listed for use in wet locations and offered with a dark bronze housing finish with optional black, gray, and white finishes available.
Hubbell Outdoor Lighting
The EcoView wireless energy management system offers users visibility into energy use as well as HVAC and lighting control from one central point. According to the company, the product’s wireless equipment and drop-in thermostats require no new wiring. In addition, it is scalable, capable of monitoring multiple locations, and allows for the scheduling control and monitoring of HVAC, lighting, and other energy loads from either on-site or remotely through the Internet-enabled EcoView Web application via wireless devices or mobile smartphone apps.
Designed to run flex conduit up to 1 in. thick through metal studs, the FlexSlider features a securing clamp to hold the flex in place with 360° protection of conduit and cable. To use, simply clip the base clip into the metal stud opening, run conduit (tie to the box), and secure the run by sliding the clamp onto the clip approximately every 4 ft. Weighing 0.05 lb per piece, the product comes in 55-piece bags featuring 35 slider clips, 15 securing clamps, and five hole punches.
PDS Power Stud Blocks are recognized under UL standard 1059 and CSA-certified to Standard C22.2. Approved up to 840A and up to 10,000 symmetrical amps, the products are designed for use with listed crimp-type lugs. Certain sizes feature a hinged cover to prevent accidental contact, and an optional cover is available on remaining sizes. Additionally, the blocks are suitable for use with flexible conductor.
The Aluminum Redi-Rail cable tray system now features an I-beam side rail design, which the company says reduces design time, installation cost, and total material procurement costs by up to 15%. This enhancement also makes the product easier to cut, handle, and install while maintaining a NEMA 12B load rating. Additionally, the I-beam design increases the material beneath each rung, creating positive rung support for increased safety and lifespan. Other enhancements include pre-punched rung and splice holes that are strategically positioned at the top and bottom of the I-beam web along the entire length of straight sections and fittings, which eliminates the need for any field drilling due to splicing or accessory attachment.
Compatible with the company’s standard Lightbar and high-output Lightbar Plus, these accessories include a diffuser lens, in-line motion sensor, and in-line dimmer control. The diffuser lens is available in five lengths (from 6 in. to 48 in.) and does not increase the overall depth or width of the Lightbar. In-line motion sensors automatically activate the luminaire when a warm moving object is detected and offer a range of up to 6 ft. In addition, light can be set to remain on for 10 sec up to 12 min. The in-line dimmer allows users to tap it to turn the luminaire OFF/ON and hold it to dim. In addition, this accessory includes an end-to-end connector, bar-to-bar joiner, flat mounting clip, and power line interconnector.
Plexo metallic and plastic junction boxes can be installed on any Cablofil wire mesh cable tray. Each box features a clip that connects firmly to the wires of the tray. The box then clicks into this clip via Cablofil’s Plexo connectors. By turning the box 45°, users achieve a secure junction box connection in seconds, according to the company. Available in 3.1-in. and 4.1-in. sizes, the 3 and 4 models of plastic junction boxes feature membrane glands for attachment without the need for cable connection hardware. These boxes have an ingress protection rating of IP55. Offered in 4 in. and 4.7 in. sizes, TC4 and TC5 models are metal twist-on junction boxes that can be installed on the side, bottom, or corner of any CF series Cablofil wire mesh tray.
CADDY ALL-IN-ONE electrical assemblies combine an electrical box, support bracket, mud ring, far-side support, and ground wire pigtail into a single solution that is ready to use right out of the box. The system provides users with the flexibility to wire from the front or the back of the assembly. The open-back design allows for easier access when installing conduit connectors or multiple circuits. Models are available with integrated, removable, or without mud rings. According to the company, the unit stays fixed in place when the mud ring is removed.
This line of tray cable connectors is designed for use with TC, ITC, PLTC, and other commonly used types of tray cable. Featuring a compensating displacement seal that provides ingress protection to NEMA 4X and IP68 standards, the connectors feature a seal insert that allows each gland to terminate the broadest cable range available in a single hub size. Manufactured in aluminum, stainless steel, and nickel-plated brass, the products offer an operating temperature range of -60°C/-76°F to 110°C/230°F and come in trade sizes ranging from ½ in. to 4 in. NPT threads are standard, while metric is available as an option. Other options include an adapter/reducer and earth tags.
The Universal Power Converter Platform (UPCP) includes a 30kW inverter that delivers 480VAC, 3-phase power and supports grounded PV arrays without an internal or external transformer. Weighing 94 lb compared to 1,200 lb conventional 30kW 480VAC PV inverters with isolation, the unit conforms to UL1741 and achieves a CEC-weighted efficiency of 96.5%. System configurations of one to 10 inverters are typical.
Ideal Power Converters
The Models 407 and 607 clamp-on meters feature a safety rating of 1,000V CAT IV and are able to wirelessly extract data stored in memory via Bluetooth technology. In addition to the standard measurement of volts, amps, frequency, resistance, and continuity, the meters measure TRMS voltage and current as well as all types of inrush. Additionally, the IP54-rated devices are capable of measuring power in the megawatt range down to 1W resolution and record up to 1,000 data points.
The CS Series of LED linear luminaires uses 40% to 50% less energy than comparable linear fluorescents and delivers up to 120 lm/W, a 90 CRI, and a 75,000-hr life, according to the company. Featuring the company’s MicroMixing optics, the luminaire comes standard with 0V to 10V dimming control to 5%.
The ArcGuard blanket helps protect users from arc blasts in underground vaults, switchyards, tunnels, and other confined spaces. Tested and rated per ASTM F2676, the blanket attaches via Kevlar webbing strips to fixed points near the arc flash hazard area to redirect the release of energy that may occur. In addition, the product meets OHSA 1910.269(T)(7) and NFPA 70E-2012, and offers a maximum arc current rating of 25kA and break-open threshold performance of 362kA cycles.
National Safety Apparel
The Arrow Hart line of switches and wallplates features EPA-registered CuVerro antimicrobial copper surfaces. According to the company, laboratory testing has shown that, when cleaned regularly, these surfaces kill more than 99.9% of bacteria within 2 hr. The line includes single, 3-way and 4-way decorator switches as well as specification-grade, standard size wallplates in multiple gangs and configurations. All products have been tested and are compliant to UL standards.
Cooper Wiring Devices
The Class R, H(K) & J knifeblade fuse blocks feature a snap-together design for easy assembly of required poles at point of application. Available in factory-assembled 2-pole and 3-pole configurations, optional high-clarity, see-through, finger-safe covers feature test probe holes. Wire terminations inspections or thermography measurements can be performed without opening the cover, and built-in standard barriers between poles enhance safety.
The company’s line of stationary diesel gen-sets — ranging from 680kW to 2,750kW — is now start Tier 4 interim certified. According to the company, the gen-sets are able to start and assume load in less than 10 sec and achieve rated load in a single step. Optional factory-integrated exhaust aftertreatments reduce emissions for high-hour use in environmentally sensitive locations.
Cummins Power Generation
Eclipse Dual Access wall-mounted cabinets provide a rigid and strong enclosure for high-density LAN cabling and 19-in. patch panels as well as for any 19-in. electronic equipment. The unit consists of a heavy-duty wall mounting rear and base through which cables enter the enclosure, the main body, and a solid or window lockable front door. The body and the door are independently hinged, with 120° opening to give unrestricted access to the front and rear of mounted equipment. All sections are constructed from 14-gauge steel finished in RAL 7035 light gray. Seamless poured-in-place gaskets provide protection against dust, oil, and water to NEMA type 3R, 12, 4, and IP66. Standard available sizes range from 16 in. high × 24 in. wide × 15 in. deep to 48 in. × 24 in. × 24 in. Other features include a pair of fixed 19-in. panel rails, tapped 10/32 that are pre-installed at the front, and additional optional mounting angles that can be added at the rear of the body.
The LRD LED retrofit downlight offers up to 70% energy savings and a 50,000-hr life, according to the company. Designed to secure to the existing, installed rough-in kit via its modular bracket system, the downlight is mercury free and dimmable down to 10% via 0V to 10V or line dimming (if control gear is already installed into the existing fixture). In addition, the luminaire can be installed into existing wired rough-in kits from below the ceiling.
The Critical Power Management System (CPMS) monitors and controls transfer switches, paralleling control switchgear, gen-sets, circuit breakers, power distribution, and other gear so it can intelligently interact with a facility’s building management system. The CPMS also enables customization of monitoring and control through a facility or campus through the use of ASCO PowerQuest.
Emerson Network Power