Cable Tie and Support System
The Ty-Rap Deltec cable tie and support system facilitates bundling and supporting cable in outdoor applications. Designed for harsh applications, including -85°F, the product features an injection-molded head and marine-grade copper barbs with a soft, pliable, and stress-resistant extruded acetal cable strap. The unit’s separate head and strapping allow users to select the appropriate strap length for the application. Preassembled systems are available with cable straps in 10-in., 13.5-in. and 27-in. lengths. In addition, 50-ft and 3,500-ft reels are available.
Thomas & Betts
The GCL 25 five-point self-leveling alignment laser with cross-line features one-button operation that can be used to quickly switch between multiple self-leveling modes and slope mode. The tool’s laser points are visible up to 100 ft and offer accuracy of ¼ in. for points and 1/8 in. for cross-line, with laser line visibility of up to 33 ft. A keypad can be used for simple line and point selection, including self-leveling, plumb up and down, horizontal leveling, alignment, right angle setting, and laser cross-line. In self-leveling mode, the laser offers a leveling range of 4° and alerts users with flashing lines when there is an out-of-level measure of greater than 4°.
The SCM 18-A cordless metal cutting circular saw features cold cutting technology and an optimized blade that increases tool life. This tool and blade combination cuts materials such as strut, threaded rod, and rebar as well as back-to-back strut and thick steel. Features include a clear vision pane for enhanced line of sight and an LED light. For more cuts per charge, the saw includes the company’s SC-C MU 6½-in. × 5/8-in. z40 A 40T ferrous metal cutting blade, which features tungsten carbide and titanium carbide tips brazed to the teeth.
The LS50L battery-powered knockout punch driver is capable of punching up to 6-in. conduit holes in 14-gauge mild steel or up to 2-in. holes in 14-gauge stainless steel. Featuring an 18V lithium-ion battery that provides 70% more cycles per charge, the driver features a lightweight, compact design and a 360° swivel-style rotating head for access to tight corners and difficult work areas. According to the company, the tool punches holes in half the time, compared to similar products, and doubles the amount of holes that conventional battery or hydraulic drivers can deliver. An LED indicator gives users the battery charge and tool maintenance status, while smart chargers control the charging current, charging voltage, and battery temperature to maximize battery life.
Greenlee, a Textron Co.
UV-rated, non-metallic Strut Clip holds pipe hangers and conduit securely onto interior or exterior strut. The strut clip is designed to work with most pipe hangers, including the company’s Quicklatch hangers, and fits a variety of conduit in multiple sizes. In addition, the easy-to-install product is threaded for a ¼-in-20 screw (installed).
The Explorer Series of customizable parkas, bomber jackets, and bib overalls offers a minimum arc rating of 46 cal/cm². Features of the HRC 4 garments include expandable pockets, an attachable hood, and oversized leg zippers. Featuring an outer lay of UltraSoft duck material to block wind and wetness, a liner inside provides further insulation.
National Safety Apparel
The SLD, XLD, and XLA Series of LED drivers are available with power from 18W to 200W. The XLD and SLD Series are UL-listed, feature the company’s easy-to-install wiring compartments that eliminate the need for a J-box, operate over a temperature range of -40°C to 60°C without derating, and are available with IP 65 option for operation in wet outdoor applications. Other features include user-adjustable output voltage and current. The XLA Series offers smooth and flicker-free AC line dimming and is provided with either a 90VAC to 132VAC input or a 180VAC to 264VAC input option. In addition, these drivers work with a wide range of TRIAC and ELV dimmer switches on the market and dim to full off. These models are Energy Star/CEC-compliant and meet UL, cUL, CE, CB, FCC Class B, and other international regulatory requirements.
Designed for prying and chiseling, this series of demolition screwdrivers transfers impact force directly to the work surface while a plated metal strike cap protects the handle from hammer blows. Applications include banging out knockouts in a junction box as well as tightening locknuts. Available blade lengths include 4 in. and
7 in. with ¼-in. and 5/16-in. tip sizes.
The Hyperion workboot features athletic styling along with the company’s Anti-Fatigue Technology, which offers molded, inverted cones that support, collapse, and return in key foot pressure zones. Features include TiTAN XL alloy safety toe (a soft toe style is also offered), Vibram outsole for durability and traction, a lightweight molded EVA Midsole for athletic performance, the company’s double toe and Ever-Guard leather backstay, and mesh lining with Agion antimicrobial treatment. Available in sizes 7-12, 13, 14, 15 M/W, the boot features the company’s PowerFit comfort system for ergonomic fit and support.
The ML Series of watertight and corrosion resistant plastic enclosures conforms to UL standard 508A as well as NEMA Type 1, 2, 4, 4X, 12, and 13 specifications. Featuring a silicone gasket seal and UL94V-0 flame-rated material, the cases are molded in light gray UV-stabilized polycarbonate and offer a clear, distortion-free polycarbonate cover option. The cover includes a standard recessed smooth finish that makes it suitable for use with or without graphic overlays or membrane keypads. Available sizes include 7.63 in. × 4.63 in. × 3.09 in. and an 8.75 in. × 5.25 in. × 3.30 in. Both sizes include molded on surface-mounting flanges, plastic mounting bosses, and brass inserts for cover on/off convenience.
The 753-647 DALI Multi-master controls 64 Digital Addressable Lighting Interface (DALI) actuators and connects with up to 64 sensors, eliminating the need to install a sensor-only parallel bus. A comprehensive configuration GUI for the module simplifies commissioning and management of DALI networks. The software’s features include simplified project overview, optimized device addressing, efficient volume processing and data backup & restore functions. To provide DALI control without extensive programming, an “easy mode” runs commonly used switching/dimming functions, as well as light scenes, within the network via digital data points for both devices and groups.
These landscape lighting transformers are suitable power supplies for installations with lower wattages and/or LEDs. Available in four models, each features an easy-to-use integrated photocell and timer system. The 120W, 200W, and 300W versions feature a stainless steel finish while the 100W model is constructed of heavy-duty polycarbonate.
Sollos Landscape Lighting
The Magnalight LEDPM-5W-30 LED luminaire is designed for applications where lighting needs to be connected to the 12VDC to 24VDC electrical systems of vehicles and equipment. A suitable replacement for metal-halide lamps, the luminaire provides 14,790 lm output, is IP68-rated waterproof and dustproof, and offers a 50,000-hr life, according to the company. Constructed of extruded aluminum with an unbreakable polycarbonate lens, the product incorporates 30 Cree Xlamp XPG LEDs and features pulse-width modulation technology that allows the unit to automatically sense and adjust to input current levels, making it multi-voltage capable and operable with any current ranging from 9VDC to 36VDC. An adjustable trunnion mount allows users to simply loosen two thumb screws and adjust the product through 360° of vertical movement.
The UL-listed Quadron CrossLink Carrier Class J fuse holder for 60-mm classic bus bar systems is 10% to 33% narrower than comparable products, according to the company. By attaching the fuses to the touch-safe fuse holder cover, which now doubles as a fuse puller, the space between the fuses is eliminated. Available in a compact design for 30A, 60A, and 100A fuses, as well as the slightly larger 200A frame size, the product uses a CrossLinkAdapter base that allows German NH00 or NH1 fuse clips to be plugged into the same base adapter as the UL Class J fuse clips.
The HeatSeeker 320 handheld thermal imaging camera offers twice the resolution of legacy models and a wider field-of-view to improve troubleshooting efficiency. Featuring a 320×240 2MP sensor that captures 76K pixels, the IP54-rated imager includes dual cursors that instantly pinpoint the hottest and coldest temperatures on a live 3.5-in. color LCD. In addition, fully radiometric and temperature measurements can be made over the entire image. Other features include: picture-in-picture imaging, text and voice annotation of images, sequence image recording by time or alarm settings, adjustable emissivity, accuracy of ±2°C, and a Class II laser for view centering.
The EP100D Series of LED drivers offers a life expectancy exceeding that of the LEDs themselves and the life of the application they are used in. The fully isolated AC/DC power supplies can operate in constant voltage or constant current modes, and include full protection against overvoltage, short circuit, and overtemperature. Available with an output of 36V/2.8A or 48V/2.1A, the drivers are configured in a fully enclosed IP67 package suitable for use in damp locations. In addition, the products include a 12V/1W auxiliary output that can be used to drive a cooling device or external sensor.
AEG Power Solutions
The Indy Designer Series Enhanced Spectrum LED luminaires include a light engine that features a remote lens with specially formulated phosphor to generate light with enhanced red, green, and blue wavelengths. With no forward heat, UV, or IR, the luminaires offer up to 1,500 lm at 4,100K or 3,000K, require only 45W input, and feature a die-cast aluminum heat sink. According to the company, the LED module maintains 70% of its initial light output after 35,000 hr of operation. In addition, the units are available in downlight and wall wash designs, with 4-in., 6-in., and 8-in. round trims or 4-in. and 6-in. square trims. They are also offered as surface-, pendant-, or wall-mounted cylinders with an extensive trim selection in a variety color options and specular, semi-specular, and satin finishes.
Juno Lighting Group
The Zipline linear fluorescent luminaire retrofit system uses an integrated ballast and lamp holder in a self-contained assembly unit to decrease components and wiring points, which the company says allows twice as many retrofit fixture installations in the same amount of time. Available with optional easy-to-assemble, snap-in reflectors, the system fits most 2×2 and 2×4 troffers, and is available in 2-lamp and 3-lamp configurations as well as in high, normal, and low ballast factors.
The Vectra Series thermoplastic emergency luminaire features a new housing design and Smart Charger diagnostics. Available in 6V and 12V, 12W to 50W units with numerous lamp head assembly options (up to three heads), the luminaire features a tool-less hinged cover for easy access. An optional self-testing feature satisfies the monthly periodic testing requirements in NFPA 101 and the IBC, and is compatible with the handheld IR testing device. Non-diagnostic units are also available. In addition, the product includes a maintenance-free, sealed lead-calcium or nickel-cadmium battery that surpasses the need for 90 min. of emergency power.
This line of definite purpose contactors is offered in SPST-NO, DPST-NO, and 3PST-NO contact arrangements, as well as 30 FLA, 40 FLA, and 50 FLA current ratings. Features include 14-4 compression lugs with 0.250-in. (6.35-mm) QC terminals, 10-32 combination screws with 0.250-in. (6.35-mm) QC terminals, and silver-cadmium oxide contacts.
Offered in five models, these infrared cameras feature the company’s IR Optiflex Focus System, which offers automatic focus with a manual focus option for close-ups; IR-Fusion Technology, which blends digital and infrared images into a single image to precisely document problem areas; and one-handed operation. Weighing 1.63 lb, all buttons are within gloved-thumb reach. According to the company, the product can withstand a 6.5-ft drop, offers multimode video recording, and is light enough to aim either vertically or horizontally.
CBMvision is an online, wireless condition monitoring system that provides near real-time diagnostics globally through the company’s CBMvision Explorer module. Scalable for applications from plant level to enterprise level, the product is designed to support remote applications that have little or no network infrastructure. Additionally, the system feeds data directly to an enterprise-level maintenance program, such as EAM, CMMS, and other solutions.
CBM Enterprise Solutions
The EVlink DC Quick Charger for electric vehicles (EVs) takes less than 30 min to charge a typical battery to 80%, according to the company. Offering options for Radio Frequency Identification (RFID) authentication or a credit card payment system, the charger offers services to support pre-install and installed-base services. In addition, the product meets UL ratings, is CHAdeMO-compliant, and will incorporate the SAE J1772 combo-coupler when the standard is finalized and released.
Featuring FM approval for Class I, Div. 2, Groups A, B, C, and D hazardous locations and rated IP67, this junction box features a cast 316 stainless steel housing to resist corrosion in salt spray environments, including chloride corrosion. The box can be mounted directly on a machine in hazardous environments, with no enclosure required. To ensure the device meets industry specifications, the box receptacles are also stainless steel and rated IP67 as long as the ports are covered/connected. Available in 6-port and 8-port models, the product can be used with M12 and 7/8-in. connector sizes. It can also be used with the company’s Minifast connectors.
The ALF12 LED floodlight and ALFW6 LED wall-mount luminaire feature an extruded aluminum housing, tempered glass lens, silicone gasket seal, and rugged knuckles with locking teeth and brass threads for easy aiming and adjustability in the field. The floodlight includes 12 1.5W LEDs that produce more than 1,000 lm at 5,000K. According to the company, the 22W floodlight produces a wide 110° lateral spread that covers three times the setback distance with uniform light. The ALFW6 offers mounting heights of 8 ft to 12 ft. Weighing 4.2 lb, this model features a quick mount plate and universal adapter that allows easy installation to 3½-in. or 4-in. standard junction boxes. Comprised of six 1.5W LEDs that produce 510 lm at 5,000K, the luminaire features an adjustable pivot from 0° to 75°, is available in 120V to 277V versions, and offers a 50,000+ hr life.
Hubbell Outdoor Lighting
The I-Beam LED high-bay luminaire can be integrated with factory-installed digital controls, such as occupancy sensors, daylight photocells, or nLight devices. Dimmable to 10%, the luminaire is suitable for mounting heights ranging from 15 ft to 40 ft and ambient environments up to 131°F (55°C). The product also meets both horizontal and vertical light level requirements through narrow or wide distributions. Reflectors are precision formed while an optional semi-diffuse lens provides glare control and LED protection.
The Terra 51 DC charger reduces electric vehicle (EV) charging times from 8 hr, using regular alternating current (AC), to as little as 15 min. to 30 min., according to the company. The charger features a full range of cloud-based services that provide connectivity, security, applications, and support. In addition, the CHAdeMO-certified device is connected to an IT network providing software upgrades, remote maintenance, servicing, and monitoring.
These metal-enclosed, pad-mounted capacitor banks are designed to IEEE, CSA, and IEC standards with standard ratings up to 25kV, 3.6 MVAR, and 150kV-BIL. Custom models are available in 1-step or 2-step configurations up to 38kV, 200kV-BIL. Constructed of 12-gauge mild steel, the units feature weather-resistant powder-coated paint and are fully self-contained. At a workable height, the product is accessible for users to conduct routine maintenance.
Cooper Power Systems
Bryant industrial-grade duplex straight blade receptacles feature a full-face, wrap-around design molded of high-impact, chemical-resistant nylon. Available in 15A and 20A versions, the receptacles are designed with a one-piece copper alloy grounding system with solid brass grounding contacts. Eight wiring pockets provide feed-through back wiring and clamp-type terminals with brass terminal screws, and accept up to No. 10 wire. Two-pole and 3-pole watertight plugs and connectors are constructed with high-visibility yellow double-insulated thermoplastic elastomer housings. Individual neoprene bushings provide a watertight seal, while PBT interiors provide enhanced resistance to moisture and temperature. The 15A and 20A connectors accept multiple cord diameters from No. 18/3 to No. 10/3; 30A models accept No. 8/4 cord. Weather-protective accessories include NEMA 1 non-conductive, impact-resistant thermoplastic elastomer portable outlet boxes, dual-receptacle covers, and blank box cover plates.
This 13,000-lm intelligent high-bay luminaire features three aimable and dimmable LED light bars, integrated sensors that assess ambient daylight harvesting and occupancy, the company’s integrated intelligence, and an IP65 wash-down rating. Available with narrow or wide optics, the luminaire offers a color temperature of 5,000K.
This months products include: Digital Lumens High Bay-Luminaires, Automation Direct's wiring products, Schneider Electric's EV Charger, NTE Electronics contactors and more.