Full Definition CR4 and CR6 LED downlights are designed to replace incandescent 4-in. and 6-in. recessed downlights. Featuring a warm-white 2,700K color temperature and a CRI greater than 80, the downlights use 20% to 30% less energy compared to the CFLs they replace, according to the company. The CR4 model delivers up to 575 lm while the CR6 model delivers up to 625 lm. In addition, both versions of the product are dimmable to 5% with most standard incandescent dimmers.
The Shockwave Expand line of extended length magnetic bit holders comes in 6-in. and 12-in. models . According to the company, the holders offer up to 10 times more life in the company’s impact drivers than standard bits. Made from proprietary steel and heat treated to control hardness, the products feature a 2-piece design that withstands abuse in impact applications.
The MM5000 and MM6000 true rms meters offer increased DC accuracy of ±0.3% and ±0.2%, respectively. The meters include a low impedance setting to eliminate ghost voltages and a µA setting for checking flame sensors. The units feature a large backlit display and analog bar graph to measure fast moving readings. Both meters are double insulated, have a rubber molding for drop protection, and are CAT IV 600V rated. Additionally, the MM6000 includes temperature and frequency settings for HVAC use and a 6,000-count display.
The Model 505ST adjustable stranded wire stripper-cutter features a thumb-adjustable dial cam for changing wire sizes from 12 AWG to 26 AWG (2.05 mm to 0.405 mm). Designed for repeated cutting and stripping, the ergonomic tool includes a Light-Touch return spring and non-slip Xuro-Rubber handle grips. Made from alloyed steel, the product locks shut to fit into a tool kit or pocket.
These lugs and splices are UL-listed and CSA-certified. Made of high conductivity wrought aluminum, the connectors are designed to accommodate 900kcmil
Aluminum Class B Concentric, Compressed Compact conductors, as well as 600kcmil Copper Class B Concentric, Compressed Compact conductors, and Class C Concentric strandings.
Available in sizes up to 3 in., the expanded family of Corrosion Resistant Stainless Steel (CRSS) connectors includes standard cord connectors, liquidtight conduit fittings, watertight conduit hubs, jacketed metal-clad cable connectors, and ventilation plugs. Custom stainless steel connectors in small or large quantities are also available.
safely connect and disconnect power, control, and instrumentation equipment, the connectors are available in two versions (MEP Series and MN Series) that feature plug-and-play simplicity to minimize installation time while providing IP68 environmental protection. Standard and custom configurations are available, combining a range of conductor numbers and sizes, contact materials, and termination options. In addition, a choice of cable support/retention methods as well as shell materials (anodized aluminum, brass or stainless steel) is offered.
The Blackburn Insulation Piercing Connector (IPC) System eliminates the need to strip cable insulation and tape or wrap the connection when tapping into power lines. Designed for main and neutral lines, the system features self-latching insulating covers that insulate and protect connections while the mechanical design eliminates the need for compression tools to install. The product accommodates a wide range of cable sizes and features connectors made of tin-plated aluminum for use with both aluminum and copper tap conductors.
Thomas & Betts
Powered by Passive Infrared (PIR) technology, GLS-OIR-C-CN occupancy sensors aren’t susceptible to vibrations in the environment. The sensors measure less than 1-in. high when installed and include an IR Remote that eliminates the need for a laptop or programmer to set up and adjust each sensor. To operate, users aim the remote at the products to adjust sensitivity for vacancy and occupancy states, timeout, and Cresnet ID.
Listed to UL1682, Neptune connectors are rated from 30A to 400A at 600V and are offered in plugs, mount receptacles, and inline receptacles. Featuring the company’s Starline Series contact system, which allows for more amperage and voltage through a smaller connector, the products are half the size and weight of other connectors in their class and include a reduced footprint option. Reversible and interchangeable, standard models are made from copper with silver plating (gold plating optional). Additionally, the units are rated IP-68-8 and have a dielectric strength of 1,800V.
The DT Series 3-Wire current transducer is available in a compact, space-saving case. The transducer uses a common point for power supply and output signal, and is factory-calibrated for a single current range. Featuring industry-standard outputs of 0VDC to 5VDC or 0VDC to 10VDC proportional to the DC current, the unit is powered by 24VDC and is easy to install, according to the company.
Three additional features have been added to the RadioRA 2 wireless total home control system. The RF SoftSwitch Module can switch an entire branch circuit of lighting, up to 16A, from the company’s Pico wireless remotes. The Daylight Control Package allows the control system to respond to ambient light levels based on the controller (sensor) settings. The Wallbox Power Module, a wireless, multi-zone dimmer/switch, allows six zones to be installed into a 4-gang box.
Featuring a digital signal processor (DSP), the SSW05 includes an integral bypass contactor and comes in the 3-hp to 75-hp motor range. The SSW07 with DSP control has built-in bypass contactors, can be connected to field bus communication networks, and is available from 5 hp to 400 hp. Offering a motor power range of 3 hp to 1,200 hp, the SSW06 features a keypad with dual display and LED digits, field bus protocols, analog and digital I/O, and internal bypass contacts. Available from 5 hp to 350 hp, the GPH2 incorporates a SSW07 soft starter, a circuit breaker with through the door handle, and a NEMA 4/12 enclosure. The TPH2 Series Crusher Duty model is housed in a NEMA 4 enclosure and comes in the 100-hp to 500-hp motor range. The SSW7000 features Flexible Torque Control, plug-and-play accessories, and a cell phone-like keypad.
Available in bottles, tubes, and packets,
De-Ox oxide inhibitor comes in three formulas. The non-grit, petroleum-based formula is suitable for aluminum and copper connections, and helps keep moisture and air from penetrating the connection. The zinc formula contains zinc flake additive and is designed for use on aluminum or copper connections. The copper formula contains copper flake additive and is suitable for use on copper connections.
EMD-BL monitoring relays come with optional push-in technology, which connects up to 60% faster than screw termination and has a retention force five times the IEC requirement to facilitate installation. Available for single-phase current monitoring, single-phase voltage monitoring, 3-phase voltage monitoring, and phase monitoring, the UL- and cUL-approved relays provide only a single function and feature a 17.55-mm-wide housing.
The GLL 2-15 cross-line laser includes the BM3 positioning device, which can be magnetically attached to metal surfaces, set on the floor with retractable feet, mounted to drywall or wood with screws, or used for ceiling grid applications. The laser can be paired with the optional BP350 pole system, which allows users to perform leveling applications at greater heights, or the optional BS 150 compact tripod. The product’s smart pendulum leveling system quickly levels the unit and alerts the user if an out-of-level situation occurs. Once leveled, the device is accurate to within 1/8 in. over 33 ft and has a 50-ft working range.
This month, EC&M magazine focuses on products from Cree, Klein Tools, Appleton, and more
Sponsored Introduction Continue on to (or wait seconds) ×