The PIP Series box provides waterproof protection of electronics. Made from polycarbonate plastic enhanced with 10% fiberglass, the box is rated to NEMA 1, 2, 4, 4X, as well as IP67. The box is available in sizes ranging from 3.15 in. × 1.18 in. × 1.37 in. to 10.04 in. × 4.92 in. × 0.25 in. In addition, it is chemical-resistant and includes captive non-metallic screws to secure the cover.
This ground clamp line now includes Type GPL U-Bolt ground clamps for pipe, rod, rebar, and fence posts. The clamps are UL-listed, CSA-certified, and suitable for direct burial in earth or concrete. Features include a spacer that affords more positive contact area as well as the ability to rotate 90° for installation flexibility.
The Cadet LED floodlight provides vertical and horizontal illumination. A direct replacement for quartz, compact fluorescent, metal-halide, and HPS lamps from 50W through 250W, optics are available in 2×2, 4×4, 5×5, 6×6, 5×3 and 3×5 NEMA distributions and are interchangeable with Type 2, 3, 4, and Type V roadway and area lighting optics. Featuring the company’s LED cartridge bezel system, the CSA-certified product offers maximum wattage of 55W and allows user to easily change the fixture output directly in the field to four different nominal levels: 100%, 75%, 50%, and 25%.
The DDH181X and HDH181X 18V drill and hammer/drill drivers feature Active Response Technology, which the company says helps reduce the risk of kickback. An acceleration sensor limits the tool’s rotation by detecting sudden movements and cuts off motor current. Both tools are compatible with the company’s 18V Li-ion batteries, weigh 5 lb or less, measure less than 9 in. long, and include an auxiliary handle that features 23 positions and a tongue-and-groove locking structure.
Designed to replace a 39W PAR20 metal-halide and using only 17W, the plug-and-play TLM-R20 LED engine features the same diameter as a PAR20 and includes an integrated driver, eliminating the need for large ballast or driver boxes. In addition, the LED engine is dimmable to less than 2% on reverse-phase dimming systems. Available in 2,700K, 3,000K, 3,500K, and 4,000K color temperatures, beam angles include 15°, 23°, 35°, and 51°.
Made of rugged polyethylene, this panel mounting post can accommodate control panel enclosures with a minimum depth of 6 in. and overall dimensions of 14 in. × 12 in. ×
6 in. The post includes four stainless steel mounting bolts with gaskets and a drilling template to assist in positioning the connections for the control panel and post. A removable access door on the front provides easy access to wiring. The product can also be mounted directly into the ground, over a 4-in. × 4-in. post or conduit.
The micro LM-400 Advanced Laser Distance Meter can read distances up to 229 ft in length. Featuring a large, backlit, 4-line display screen, the meter includes an inclination angle measurement system for indirect measurements in hard-to-reach areas; an advanced calculation feature that can adjust units instantly to inches, feet, or meters; and storage space for saving up to 20 measurements at a time. The device is also IP54 dustproof, splashproof, and features auto shut-off after 3 min. of inactivity to preserve battery life. Via Bluetooth, the unit is compatible with smartphones and tablets.
The Rigid Fittings BlueKote Universal Conduit Elbow (LU) Form 8 replaces four conduit body configurations. The conduit elbow enables fiber-optic cable to be run in a ¾-in. system, instead of a 2-in. system, and still maintain the cable bend radius. An angled covered port facilitates wire pulling and uses standard covers. Because the product is UL-listed as an enclosure, splices are permitted inside of it. In addition, it is rated for 40% wire fill, avoiding the need to de-rate the system.
Thomas & Betts
The DCF681 8V MAX* gyroscopic screwdriver with conduit reamer includes sensors that allow users to control the motion of this tool with a simple turn of the wrist — right to tighten screws, left to loosen or remove screws. The conduit reaming function will deburr ½-in., ¾-in., and 1-in. EMT conduit. Features of the screwdriver include variable-speed control, an 8V Li-ion battery, LED light, a battery state of charge displayed that notifies users when to charge the battery, and a magnetic ¼-in. hex bit holder that accepts standard bit tips.
Designed to work inside the company’s Tuff-Grip Pro cases, S-Class fish tape features a non-conductive and non-arcing eyelet tip to minimize the risk of injury from accidental contact with electricity. The eyelet features streamlined ribs and a curved loop that reduces stress points on the fish tape while being pushed. Available in 50-ft, 100-ft and 200-ft lengths, the product’s smooth nylon jacket easily slides over existing wires and around bends.
This month, EC&M magazine focuses on products from Bosch, Ridgid, DeWalt, and more
Sponsored Introduction Continue on to (or wait seconds) ×