The DCS371 20V MAX* band saw weighs 9.4 lb (with battery) and measures 15 in. long. Designed to cut conduit, rigid pipe, Uni-Strut, threaded rod, or other materials up to 2½ in. in diameter, the saw’s battery and motor are located on opposite ends of the tool, allowing it help users make a straight cut. Features include: an LED work light with 20-sec delay; a hang hook; a blade tracking adjustment to prolong the life of the blade; an ergonomic, soft grip back handle; a tool-free blade changing lever that loosens blade tension for easy blade changes; and dual bearing blade guide rollers.
Designed to deliver jam-free performance, these step drill bits are optimized for high-speed cordless drills. Featuring a Rapid Strike tip, the bits prevent bit walking and deliver fast, accurate starts that generate less heat, according to the company. Coupled with a dual flute step geometry, these products deliver up to 2× faster hole times, provide up to 4× longer life, and offer up to 50% more holes per battery charge than the competition. Ranging in size from ½ in. to 13/8 in., the products come in 11 models and three kit variations.
Dimmable from 0V to 10V, the BayMAX LED linear high-bay luminaires are DesignLights Consortium (DLC) qualified. The 110W, 160W, and 250W luminaires are designed to replace T8 and T5 fluorescents and up to 450W pulse-start metal-halide high-bay models. Suitable for applications that require high mounting ceiling heights of 15 ft to 40 ft, the products feature a 22-gauge, cold-roll steel housing and operate on universal 120V to 277V electrical systems. A specular reflector controls light distribution while a topside access door provides convenient driver access. Bi-level controls, an occupancy sensor, wire guards, and lensed doors are among the available options. Accessories include 10-ft SO cords and plugs for 120V or 277V systems and cable hanging kits.
The redesigned 6200 Series of stepladders includes the Locktop, an upgraded ladder top that features a high-capacity hardware bin, a slot for a drill or hammer, a pipe holder, Lock-In Accessory sockets, and a magnetic strip for holding nuts, bolts, or other loose parts. Additional changes include the Edge360, which increases the size of the ladder foot pad, braces the first step, and provides 360° protection at the base of the ladder rails. Available in fiberglass, the product comes in a variety of sizes and features bright orange rails and a yellow top.
This ANSI C136.41-compliant photocontrol receptacle is designed for the electrical and mechanical interconnection between a photocontrol cell and a streetlight. Suitable for outdoor commercial and electric utility lighting, the dimming receptacle is pre-configured with wire leads to allow for ease of integration into a new or existing outdoor luminaires. In addition, the product incorporates two or four signal connections along with ANSI C136.10-compliant twist-lock power connections that provide 1- or 2-channel photocell dimming capabilities within streetlights. Mating spring leaf contacts are available for customer-designed photocontrol assemblies.
DEB1 tools deburr and chamfer to manufacturers’ standards in seconds, according to the company, allowing solvent to spread evenly as the now chamfered pipe is joined. Designed for use with PVC, CPVC, ABS, PE, and PP pipe up to 2 in. in diameter, three sizes are included in one tool for iron pipe size, copper tube size, or metric up to 32 mm. Additional features include internal pipe guides, a knurled grip for slip-resistance, and sharpenable and/or replaceable blade.
The 11.5W ProLED Omnidirectional A19 lamps feature 300° light distribution, allowing the light pattern to more closely resemble a standard incandescent lamp. Dimmable to 5% and Energy Star-qualified, the lamps are up to 81% more efficient than standard 60W incandescent models, according to the company. Available in 2,700K and 3,000K color temperatures, the products offer a 25,000-hr life and 5-yr limited warranty.
Halco Lighting Technologies
This line of 120V and 12V LED lamps is designed for use in outdoor and indoor wet locations. Certified and listed for use in open or enclosed fixtures, the 120V PAR38, PAR30, PAR30 longneck, and PAR20 models offer a wide selection of beam spread options as well as 2,700K, 3,000K, and 4,200K color temperatures. In addition, the products feature a 30,000-hr life, 6-yr warranty, weather-coated and epoxy-potted electronics, and an anodized black cast-aluminum heat sink.
The True Shape Series of LED lamps comes in A-shape, PAR, and reflector styles. The 11W LED A19 offers a 2,700K color temperature rating and features the same dimensions as a traditional incandescent bulb with a smooth heat sink. Featuring a similar design with a smooth heat sink, the PAR lamps offer additional beam angle options of narrow flood (25), flood (40) and wide flood (60). In addition, all models are Energy Star qualified and fully dimmable, feature a 5-yr limited warranty, are rebate eligible, and contain no mercury, lead, or other hazardous materials.
These second-generation 75W and 100W LED equivalent lamps are now Energy Star qualified. With electric utility rebates of up to $10 per lamp, the 15W A19 and 19W A21 lamps fit into existing luminaires and work with standard dimmers. In addition, the products offer a rated life of 25 times longer than a standard incandescent model, according to the company.
The CyTime SER-2408 sequence of events recorder is designed to help simplify testing of emergency power supply systems (EPSSs) in mission-critical facilities. With 24 high-speed digital inputs, eight control relay outputs, and data-log groups with simultaneous recording of inputs/outputs, the recorder enables specialized reporting to support mandatory test compliance with standards for health care and other critical-power facilities. In addition, the product is available with up to 32 GB of memory for distributed storage of user drawings and documentation.
The M-Line of multi-pin connectors is for heavy-duty and hazardous locations up to 600VAC/DC. Designed to safely connect and disconnect power, control, and instrumentation equipment, the connectors are available in two versions (MEP Series and MN Series) that feature plug-and-play simplicity to minimize installation time while providing IP68 environmental protection. Standard and custom configurations are available, combining a range of conductor numbers and sizes, contact materials, and termination options. In addition, a choice of cable support/retention methods as well as shell materials is offered.
IRSoft 3.3 thermal imaging software features IrApi (application programming interface) for processing *.bmt files in external software. The main functions of the IrApi include display of the thermal image, display of the real image, and retrieval information such as device designation, serial number, or temperature values. Additional enhancements include extensions of the fully radiometric video function and support of Windows XP SP 3 or higher, Windows Vista SP 2 or higher, Windows 7 SP 1 or higher, and Windows 8 or higher operating systems.
The Premium X-Switch offers SKRU, interlock keys, and a safety slide bar. Standard features of the UL-listed switch include: vertically operated breakers, easy-to-understand labels with instructions for the user and installer, hinged main door, breakers located behind a closed door (optional lock available), and a one-line diagram for the user with another copy insider for the installer.
The Wiremold InteGreat A/V table box provides power, A/V, and communication to the work surface point of use. Cable retractors accommodate up to 5 ft of Cat. 6, HDMI, VGA, or 3.5-mm audio cable and latch to the side of the box. Featuring a cable grommet kit that accommodates up to eight pull-out connections or up to five AVIP or Extron MAAP installed connectors, the box includes two 15A receptacles in the top compartment and one 15A receptacle on the underside.
The Smart tensiometer gives users rope tension, pulling speed, pull distance, and sidewall pressure data via a wireless connection, allowing them to save pulling data to onboard memory, create reports, and send information immediately. Able to automatically store up to 16 GB of data, the unit features a USB port. The tensiometer’s display unit and load sensing unit pair wirelessly and automatically. The load sensing unit attaches to any Maxis cable puller in less than 1 min. through the use of hitch pins, and the unit is calibrated up to 10,000 lb with most pulling rope sizes.
Developed by Delphin Technology, this energy measurement case is designed to acquire digital impulses from electricity, gas, and water meters. The mobile device helps users analyzing or recording energy data as well as service providers commissioned by clients to record energy measurements. Suitable for fault data acquisition, vibration analysis, and quality assurance, the case features a 3-phase power measuring unit for measuring the electrical power from motors, pumps, drives, etc. Energy data from PLC or control systems can also be acquired via field bus interfaces.
CAS Data Loggers
Emax Link allows users to design and build their own UL 1558 switchgear. Developed to maximize the functionalities of the company’s Emax power circuit breakers, each abbreviated switchgear section includes all frame members, panels, barriers, and busing needed for metal-enclosed construction, requiring only the addition of control devices, side covers, bus splices, wiring, and the Emax breakers. The product is available with a main bus rated current up to 10,000A at 600V and comes in many configurations, such as main breaker, tie breaker, feeder breaker, and auxiliary sections.
This month, EC&M magazine focuses on products from DeWalt, TE Connectivity, Bulbrite, and more
Sponsored Introduction Continue on to (or wait seconds) ×