advanced search

Remote Transforms Traditional Exit Sign Testing

May 1, 2006 12:00 PM, By Jaclyn Alcantara, Associate Editor

Responsible for preventive maintenance for East Carolina University's 115 buildings in Greenville, N.C., PM engineer Anthony Patrick says his employees are required to perform 30-sec (monthly) and 90-min. (yearly) tests on all emergency exit lights in buildings not connected to back-up power generators per NFPA 101, Chap. 7, Sec. 9.3. In the past, this task required pressing a manual switch located on each exit sign.

Climbing a ladder to push a button may not seem that time consuming — until you multiply this act by 50 to 100 emergency exit signs per building. But by using the new CheckMate ET1, a remote control emergency exit light tester designed by Collierville, Tenn.-based life-safety products manufacturer The Bodine Co., Patrick estimates he saves 70% to 75% in man-hours on the annual 90-min. testing alone.

“Our life-safety people love it,” Patrick says. “When they get on a long hallway, they can walk down the hallway and activate all of them without having to carry a ladder.”

Not having to use a ladder also prevents injuries caused by slipping off of the structure or being bumped by someone passing by, especially when testing exit signs in the middle of heavy-traffic hallways and corridors.

Designed by Bodine's R&D manager David Crenshaw in the late '90s for emergency lighting ballasts, the remote control test (RCT) technology was recently applied to emergency exit signs after Patrick expressed interest in such a product to a Bodine sales representative. Crenshaw had received a patent in March 2004 to use RCT technology on emergency exit signs, but says that the customer interest later that year was the catalyst for actually developing the product for commercial use. Released to the public on December 1, 2005, the CheckMate ET1 can activate monthly or yearly testing using a remote control (model WHRCT, sold separately) within 30 feet of the device.

“This test involves simulation of a power outage to the emergency exit sign,” says Crenshaw. “The exit sign must then operate from its own internal battery during the test, which is designed to test the readiness of the battery and the lamps in case of an emergency.”

The RCT feature works by replacing the manual testing switch with a relay that is controlled by a circuit mounted inside or on the unit, explains Crenshaw. The control circuitry incorporates an infrared detector and a microcontroller that is activated by the infrared hand-held remote control transmitter. A single remote can be used to test any CheckMate ET1. In order to make this technology reliable, Crenshaw had to come up with his own infrared code for transmitting and receiving to avoid noise interference. “Infrared energy is abundant anywhere you have fluorescent lighting, and it's in the form of noise,” Crenshaw says. “The [infrared] code was designed to penetrate that noise so that the receiver could discriminate against all the noise and pick out this transmitter signal easily.”

Although Crenshaw concedes that CheckMate is not the only way to test emergency exit lights without using a ladder, he doesn't recommend the alternative: An individual can throw the breaker for a branch circuit and then go back and look at the entire branch to see if all exit signs are lit. The problem with this method, he maintains, is that it leaves an entire area without power. “So during the day — or when there's activity going on — that's not very feasible to do,” Crenshaw says. “Code regulations do not recognize or advocate this method of testing.”

Alternatively, Crenshaw hopes that CheckMate ET1's ease of use will encourage more people to follow the NFPA code. “By having the remote control, we remove that inconvenience factor,” Crenshaw says. “By making it convenient, hopefully it will promote the idea that this needs to be tested.”

Priced around $25, CheckMate ET1 is not only simple to use — it's also easy to install and works with most existing fixtures, according to Patrick.

“It's a 3-wire hook up. You have to drill a ½-inch hole in the outside of the device — then it's just very simple wiring,” he says. “It takes our people about 5 minutes to install this — that includes setting the ladder up and getting to the exit sign.”

For more information, visit www.bodine.com.

Product Specs

AC input current:	35mA @ 120VAC; 70mA @ 277VAC
AC input power rating:	415mW @ 120VAC; 1.1W @ 277 VAC
Max switched current:	200mA
Max switched voltage:	277VAC
Temperature rating:	0°C to 50°C (32°F to 122°F)
Dimensions:	4.06 in. L × 1.26 in. W × 1.03 in. H
Weight:	3 oz (85 g)

Want to use this article? Click here for options!

© 2012 Penton Business Media, Inc.

Browse Back Issues Select an Issue November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 1, 2009 December 2008 November 2008 October 1, 2008 September 2008 August 2008 July 2008 June 1, 2008 May 2008 April 2008 March 2008 February 2008 January 2008 December 2007 November 2007 October 2007 September 2007 August 2007 July 2007 June 2007 May 2007 April 2007 March 2007 February 2007 January 2007 December 2006 November 2006 October 2006 September 2006 August 2006 July 2006 June 1, 2006 May 1, 2006 April 2006 March 1, 2006 February 2006 January 2006 December 2005 November 2005 October 2005 September 2005 August 2005 July 2005 June 2005 May 2005 April 2005 March 2005 February 2005 January 2005 December 2004 November 2004 October 2004 September 2004 August 2004 July 2004 June 2004 May 2004 April 2004 March 2004 February 1, 2004 January 1, 2004 December 1, 2003 November 1, 2003 October 1, 2003 September 1, 2003 August 1, 2003 July 1, 2003 June 1, 2003 May 1, 2003 April 1, 2003 March 1, 2003 February 1, 2003 January 1, 2003 December 1, 2002 November 1, 2002 October 1, 2002 September 1, 2002 August 1, 2002 July 1, 2002 June 1, 2002 May 1, 2002 April 1, 2002 March 1, 2002 February 1, 2002 January 1, 2002 December 1, 2001 November 1, 2001 October 1, 2001 September 1, 2001 August 1, 2001 July 1, 2001 June 1, 2001 May 1, 2001 April 1, 2001 March 1, 2001 February 1, 2001 February 1, 1995 January 1, 2001 December 1, 2000 November 1, 2000 October 1, 2000 September 1, 2000 August 1, 2000 July 1, 2000 June 1, 2000 May 1, 2000 April 1, 2000 March 1, 2000 February 1, 2000 January 1, 2000 December 1, 1999 November 1, 1999 October 1, 1999 September 1, 1999 August 1, 1999 July 1, 1999 June 1, 1999 May 1, 1999 April 1, 1999 March 1, 1999 February 1, 1999 January 1, 1999 December 1, 1998 November 1, 1998 October 1, 1998 September 1, 1998 August 1, 1998 July 1, 1998 June 1, 1998 May 1, 1998 April 1, 1998 March 1, 1998 February 1, 1998 January 1, 1998 December 1, 1997 November 1, 1997 December 1, 1996 November 1, 1996 October 1, 1996 September 1, 1996 August 1, 1996 July 1, 1996 June 1, 1996 May 1, 1996 April 1, 1996 March 1, 1996 February 1, 1996 January 1, 1996 December 1, 1995 November 30, 1995 November 1, 1995 October 1, 1995 September 1, 1995 August 1, 1995 July 1, 1995 June 1, 1995 May 1, 1995 April 1, 1995 March 1, 1995

browse e-newsletters