Q. What is the smallest conductor allowed by the NEC for Class 1 control and signal circuits? A. Conductors of sizes 18 AWG and 16 AWG installed in a raceway, enclosure, or listed cable are permitted for Class 1 circuit conductors if they don’t supply a load that exceeds the ampacities specified in Table 402.5. Conductors of 14 AWG and larger must not supply loads greater than the ampacities given in 310.15 [725.49(A)]. In addition, Class 1 circuit conductors must have a 600V ...

Website Registration Required to Access this Content

Only registered users have access to Silver content.

Registration on EC&M allows you exclusive access to high value content centered around proprietary research, expert NEC analysis and in-depth technical procedures.

Already registered? here.