The G-Series is a flywheel-based CleanSource UPS designed for power applications ranging from 300kVA to 600kVA. Offered in 480V (300kVA and 600kVA) and 400V (250kVA and 500kVA) power configurations with N+1 capability, the UPS features a full-color touch-screen display and internal maintenance bypass.
Two communications options have been added to the Encore Series of power quality, demand, and energy monitoring systems. The first is the IEC 61850 communications option that will be bundled, when specified, into Dranetz 61000 Series instruments, allowing interoperability to be achieved between Dranetz and third-party devices in utility substation environments operating under the IEC 61850 automation, communications, and integration protocol. The second option is the EssOpc Module, an OPC Gateway for the company’s Encore Series software. OPC establishes a common interface for third-party devices to allow access by other systems, including building management and SCADA.
These EMI filters with optional surge suppression can be mounted with ¼-in. quick-connect terminals, allowing them to be mounted wherever needed (including directly in front of components generating excessive interference). Featuring fully encapsulated construction that complies with EN 133200 and UL 1283, the filter’s UL94 VO plastic enclosure increases protection against electrical shock. RoHS-compliant, the product is available in three line voltages: 100V to 120V, 200V to 240V, or 100V to 277V. Standard models incorporate
5 mH common-mode inductors suitable for up to 6A service. Available options include bypass capacitors for increased differential mode noise rejection and MOVs to protect against line transients.
The AutoTransLineator autotransformer with built-in harmonic filter offers multipulse performance for 6-pulse variable-speed drives (VFDs) on low-voltage applications where the VFD voltage rating is different than the service voltage, addressing the need for either step-down or step-up line voltage transformation. According to the company, the product treats all major harmonics generated by VFDs and other 3-phase, 6-pulse rectifier loads; meets IEEE Std 519; can be easily applied to a single or group of VFDs; and has a power factor of 0.98 lagging to 0.95, and an input current demand distortion of less than 5% on systems that have an lsc/IL ratio of less than 20.
This preassembled rail features components typically used in wireless remote monitoring and control applications, especially in the oil and gas, water/wastewater, and electric utility industries. Components include two input terminal blocks (one in green and one in gray for easy VIN identification), 3A TMC thermal-magnetic circuit breaker, 1.3A MINI power supply, 120V Type 3 surge protection, and end caps for component stability on the rail. Components are mounted (but not wired) on a 13.1-in. DIN rail. The extended rail length accommodates the company’s I/O, data, or one-way radio systems.
Suitable for new construction and retrofits, the Mighty-Merge 4157-DC transition fitting transitions 14/2 to 10/3 AC/MC cables to EMT conduit without damaging conductor insulation. The fitting enables users to remove the desired length of armor that will allow for the exposed conductors to reach the device box or enclosure. The required inspection holes provide for a positive visual end stop for armor and recommended anti-short bushings. Users then tighten screws for cable between armor convolutions and for ¾-in. EMT.
The T26E (formerly the E26MJ) boom lift includes a vertical telescopic mast with a jib that enables users to reach above and around obstacles. Featuring an enhanced direct electric drive, the boom lift offers a longer battery life with more duty cycles. The product also features an AC motor with quieter operation, a platform capacity of 500 lb, a width of 39 in., and platform height of 26 ft. According to the company, it is large enough to hold two users and their supplies.
SafingPaks are precut pieces of the company’s UL and Intertek (OPL) listed/tested Safing fire-stop insulation for use in floor/ceiling and wall penetrations, construction joints, and other firestopping applications. The products are packaged in a bag that features a resealable opening and an easy-grip handle.
The GR-52 LED garage luminaire maintains more than 70% of its lumens up to 82,000 hr, according to the company. Featuring optics that provide an accurate V-type square lighting pattern, the luminaire is available in either a 60W model or a 63W model, each with color-rendering index (CRI) of 74 and a lumen-per-watt ratio of 87. In addition, the unit does not become warmer than 60°C.
Jugo-Nuts is a portable container that holds job-site quantities of the company’s Wall-Nuts (quantities include 650 2-wire, 400 4-wire, 250 6-wire, and 2- to 3-wire 10 AWG), Lever-Nuts (quantities include 350 2-wire, 250 3-wire, and 150 5-wire), or Lumi-Nuts (quantities include 350 2-wire, 250 3-wire, and 150 5-wire) connectors. Measuring 45/8 in.×45/8 in.× 6¾ in. high, the containers are positioned between smaller contractor boxes and bulk carton quantities. They also feature a screw-top lid.
Compact enough to be held in one hand, the 61-797 digital insulation meter enables periodic testing of insulation for signs of deterioration and helps expose short circuits or shorts to grounds. Using test leads, users can quickly determine the integrity of insulation in new and existing wiring by identifying capacitive, absorption and leakage current at multiple test voltages (50V, 100V, 250V, 500V, and 1,000V) and resistance up to 20G-ohms. In addition, the product measures earth-bond resistance, automatically senses and displays AC-DC voltage to 600V, and calculates the polarization index and dielectric absorption ratio.
The io lili is a 2-ft × 2-ft recessed LED indirect luminaire designed to replace comparable fluorescent alternatives. Featuring an organic reflector design, the luminaire provides soft, glare-free illumination without excessive brightness and produces light levels that are compliant with IES standards, according to the company. In addition, the product produces a bright white color temperature of 3,500K, features a CRI of >80, can be dimmed to 5%, and offers a projected average rated life of 50,000 hr at 70% of lamp lumen output.
TL 175 TwistGuard test leads feature a manually adjustable test tip guard for use in changing measurement situations. By twisting the test lead, users can change the exposed probe tip length from ¾ in.
(19 mm) to 4/25 in. (4 mm). Fully extended, the test leads are safety rated for CAT II 1,000V use; when retracted, they are safety rated for CAT III 1,000V and CAT IV 600V. In addition, each product is covered by two layers of silicone insulation: red or black on the outside and white on the inside, giving users a visual warning if the leads become nicked or scuffed.
ServiceDrive Plus Armored ASD/VFD cable with EnviroPlus provides environmentally safe properties using a rugged, flame-retardant, low smoke, lead-free, halogen-free compound. According to the company, the product helps mitigate issues with cross talk, stray currents, premature bearing failure, and motor bearing fluting damage.
The Powr-Gard LF Series of DIN-releasable, compact, indicating fuse blocks features universal mounting holes for drop-in replacement. The products offer local indication via neon light, providing obvious notification when a fuse is open. In addition, the product may be used with the company’s indicator fuses that show a darkened window when the fuse has opened. According to the company, their compact size reduces space requirements by up to 30%.
The h-style (3-branch) and H-style (4-branch) M16 tees are available in a multitude of configurations, including tees with a male connector on either side of the trunk line, integral connections, or cable drop. The products feature a PUR overmold and PVC flexlife cable jacket. In addition, they are offered in varieties with 2- through 8-pin connectors in nickel-plated brass, stainless steel, or nylon. In addition, the units are rated for up to 600V and 18A.
The DL150 single-channel and DL160 dual-channel true RMS AC voltage and current dataloggers measure and log AC voltage to 600V and current to 200A with sampling rates ranging from 1 per sec to 1 per 24-hr period and recording capacity of 100,000 (DL150) or 256,000 readings (DL160). Readings can be downloaded via USB to a laptop or PC for analysis, trending, or exporting to Excel format using the product’s software application. In addition, a 2-line LCD displays time/date, current measurement, and min/max values. The loggers also can operate in both continuous (overwrite) or stop-when-full recording modes.
Available in D trip curve option, the UL1077 DIN-rail-mounted miniature circuit breakers product line includes standard UL 1077 supplemental protectors with ratings ranging from 1A to 63A, high current versions for protection up to 125A, and DC-rated styles in one and two pole. The standard NDB2 Series is available in one, two, or three pole — all with a 10kA interrupt capacity. In addition to being 300% tested, they feature a visual color-coded trip indicator, shock-proof screw clamp connections, and are RoHs-compliant. The 18-mm footprint makes them a suitable drop-in replacement for most industry-standard circuit breakers.
Automation Systems Interconnect