A sealing fitting shall be installed within _____ of either side of the boundary where a conduit leaves a Class I, Division 1 location. a) 5 ft b) 6 ft c) 8 ft d) 10 ft See answer and applicable Code reference The correct answer is: d) 10 ft Article 501 outlines the requirements for electrical and electronic equipment and wiring in Class I, Division 1 and 2 locations. As noted in a portion of 501.15(A)(4), "The sealing fitting shall be permitted on either side of the boundary of ...

Website Registration Required to Access this Content

Only registered users have access to Silver content. 

Registration on EC&M allows you exclusive access to high value content centered around proprietary research, expert NEC analysis and in-depth technical procedures.

Already registered? here.