AC or DC general-use snap switches may be used for control of inductive loads not exceeding _____% of the ampere rating of the switch at the applied voltage. a) 50 b) 75 c) 90 d) 100 See answer and applicable Code reference The correct answer is: a) 50% Snap switches shall be used as noted in Section 404.14(A) through (F) of the 2011 NEC. As noted in 404.14(B)(2), the use of general use snap switches suitable for use on AC or DC circuits for controlling inductive loads shall not exceed ...

Website Registration Required to Access this Content

Only registered users have access to Silver content.

Registration on EC&M allows you exclusive access to high value content centered around proprietary research, expert NEC analysis and in-depth technical procedures.

Already registered? here.