NEMA Responds to Court Ruling on Transmission Corridors

Representatives from the National Electrical Manufacturers Association (NEMA), Rosslyn, Va., recently expressed disappointment with the outcome of the Department of Energy’s (DOE) efforts to establish two National Interest Electric Transmission Corridors (NIETC) as a result of last week’s decision by the U.S. Court of Appeals for the Ninth Circuit that overturned DOE’s 2007 NIETC designations. The NIETCs were proposed under authority granted in the Energy Policy Act of 2005 (P.L. 109-58).

The court’s decision to invalidate the designation of these two corridors delays the timely development of a more reliable electric grid in two of the most congested areas in the country, maintains NEMA President and CEO Evan R. Gaddis. “Delivering power, including power from renewable energy sources, to where it is needed should be a national priority,” says Gaddis. “This cannot be done without adequate high-voltage transmission lines.”

DOE designated the Mid-Atlantic region and a region in the Southwest surrounding Los Angeles and San Diego as areas where electric constraint or congestion is hurting consumers to an unacceptable degree. While not an approval of any particular interstate transmission project, this designation would allow the applicant to apply to the Federal Energy Regulatory Commission (FERC) if the applicant fails to receive approval from a state.

According to NEMA, the court decision only reinforces the importance of the association’s advocacy for a legislative solution that gives FERC expanded authority to site high-priority interstate transmission lines and the ability to coordinate federal environmental reviews, just as FERC has for interstate natural gas pipelines. “The current process for siting interstate transmission lines is too slow and too costly to the public,” says Jim Creevy, NEMA director of government relations. “NEMA is redoubling its efforts to ensure that the nation’s transmission infrastructure is not an impediment to our energy security.”


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues