Texas' ERCOT to Make $3.6 Billion in Transmission Improvements

Transmission providers in the ERCOT region expect to complete more than $3.6 billion in projects between 2014 and 2018.

Texas power lines

A report recently released by the Electric Reliability Council of Texas (ERCOT) identifies several transmission improvements planned for the next five years to address growing needs on the electric grid that serves most of Texas.

According to the 2013 Report on Existing and Potential Electric Constraints and Needs, transmission providers in the ERCOT region expect to complete more than $3.6 billion in projects between 2014 and 2018. These include additions or upgrades to more than 3,300 miles of transmission lines and other equipment improvements to increase capacity and support reliability.

Improvements identified in the report focus on existing and potential constraints, where limited capacity of transmission infrastructure could create reliability concerns or increase power costs for consumers in the next five years.

Reducing current and future congestion concerns

In recent years, the most significant constraints in the ERCOT system resulted from high electric demand associated with oil and gas exploration and production in the Permian Basin. Transmission providers in the region have already implemented many improvements to address those concerns and will continue to do so in the coming years.

As similar growth has occurred in the Eagle Ford Shale region of South Texas, ERCOT’s Regional Planning Group, which includes transmission providers and other market participants, has approved about $331 million of improvements for completion between 2014 and 2017 to address constraints in that area.

A combination of growing electric needs and an aging generation fleet in the Houston area is resulting in more transmission congestion in that region. Previous studies have identified the need for a new transmission line to deliver power to the Houston area, and ERCOT plans to complete an analysis of three proposed solutions in early 2014.

Another priority is the Lower Rio Grande Valley, where there are only two high-voltage circuits to carry power into the growing region. Two projects scheduled for completion before the summer 2016 peak season will improve the capability to import power into the Valley and serve growing electric demand in the Brownsville area.

The recently completed Competitive Renewable Energy Zones (CREZ) projects have eliminated congestion that had limited power flows from West Texas to more populated areas in central and eastern Texas. ERCOT currently is studying whether additional enhancements will be needed to support increasing development of wind power expected in the Panhandle region.

As the transmission planning authority for the region, ERCOT works with transmission and distribution providers and other stakeholders to identify the need for new transmission facilities based on engineering analysis of operational results, load forecasting, generation interconnections, and transmission and system studies. Additionally, long-term studies released in even-numbered years look at long-term needs under a variety of scenarios. The next Long-Term System Assessment will be released in December 2014.


Please or Register to post comments.

Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Sep 10, 2015

ON DEMAND: An Effective Electrical Safety Program that Delivers

This hour-long webinar will cover the wording in various IEEE recommended practices, NFPA 70E and ANSI Z10 with an emphasis on what it means in terms of designing, implementing and managing an Effective Electrical Safety Program....More
Jul 21, 2015

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×