Work Smarter, Not Harder

"No pain, no gain.” You’ve no doubt heard this body-building phrase many times before

"No pain, no gain.” You’ve no doubt heard this body-building phrase many times before, and you’ve probably even said it on occasion. It sums up a lot of people’s views on what it takes to improve the physical condition of the body. In other words, if you’re not willing to push yourself to the threshold of pain, you’ll never see an improvement in your muscle definition and tone. The problem with this phrase lies in the fact that too many people apply it to their daily work activities, too. And that’s where misapplication of these four little words can lead to some really big problems.

Chances are you have a pretty good feel for what your own body can and can’t do. If you’re like me, you rely on this innate sense to guide you through your daily tasks. But I’m willing to bet you’ve ignored your body’s better judgment and decided to push it just a little bit harder than you should by picking up that extra 20 pounds because you don’t want to make an additional trip to the truck or by trying to pull that piece of equipment in place by yourself rather than asking for help from a coworker. Many times, this choice results in an injury, which could lead to a long-term disability.

There are plenty of motivations for these decisions, but they’re all bad. Maybe you feel the need to “be a man”—or if you’re a woman “be able to work as hard as a man”—but these acts of bravado will eventually catch up with even the most physically gifted of workers. Or maybe you put yourself in harm’s way in the name of speed. In a rush to meet a deadline, it’s easy to make a poor decision and try to complete a task without assistance or without the proper equipment.

So how do you fix the problem? You have to stop misapplying the “no pain, no gain” maxim to your daily work tasks and abide by a new proverb: “work smarter, not harder.” I think you’ll agree that it may not be as difficult as you imagine to avoid certain types of chronic pain disorders and permanent injury if you just follow the advice outlined in this month’s cover story, “Stop Hurting Yourself,” on page 42. Managing Editor Matthew Halverson tracked down an ergonomics guru and a professor in the department of occupational and environmental health at a major university to shed some light on this topic and show you some easy ways to avoid injury by simply adjusting your work position when performing certain tasks.

So the next time you’re performing a task that puts your body to the test, take a little time to brainstorm a new, less strenuous technique instead of putting up with the pain. And the next time your innate pain alarm goes off, listen to it—it’s there for a reason. You just might find that all those nagging aches and pains and injuries you’ve been suffering from in recent years slowly disappear.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues