Avoiding Landmine Repairs, Part 5

June 7, 2013

A really bad way to find a missing torque wrench is to energize the equipment and wait for the arc blast. Tool counts help prevent such outcomes, but what if you can't find a missing tool? If you conclude your initial count was wrong but the tool is sitting across Phase A and Phase B bus rails, a disaster will follow.

Avoid this problem by breaking down the repair procedure into distinct stages. Count tools before and after each stage. For example, you need to remove a breaker so you can replace it. Once the breaker's out, count your tools. If one is missing, you have a good idea of where it is.

What if you accidentally kick a tool under something and can't find it? Prevent this — and other problems — by making a habit of putting tools in or on something, such as a bucket, tool towel, or cart, when they aren't in your hand.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.