Ecmweb 8476 Img1775rev
Ecmweb 8476 Img1775rev
Ecmweb 8476 Img1775rev
Ecmweb 8476 Img1775rev
Ecmweb 8476 Img1775rev

Developing a Training Program for Energy Storage and Microgrid Systems

Oct. 9, 2016
New technologies create the need for new training programs

The best way to capture work in a new and emerging market is to take part in training and become certified as an expert in this type of work. Certification can help differentiate you and your company from others that might claim they are qualified to do this type of work, but really aren’t.

The Energy Storage and Microgrid Training and Certification (ESAM-TAC) program was conceived by IBEW and NECA in response to a boom in the energy storage market. This program is also supported by the National Science Foundation.

Session speakers Bernie Kotlier, executive director, California and Nevada, Labor

The project goals that have been set up for this program include:

• Develop training program and certification for energy storage installation

• Serve electrical workers and NECA, IEEE and utility professionals

• Develop blended and tested learning modules

• Support launch of regional hubs for training

• Develop, test and initiate train-the-trainer programs

This three year project will also certify its program through the Electric Power Research Institute (EPRI). This independent organization will monitor and classify the certification program.

Early work in this area is being supported by partnerships with energy storage manufacturers, battery manufacturers, and NECA contractors with data center experience. A train-the-trainer pilot training program will take place December 5-9, 2016 at the GridSTAR Center in the Philadelphia Navy Yard.

Lessons learned to date include:

• Data center battery assembly and maintenance requires specialty skills not formerly covered in existing training programs. ESM systems will require even more knowledge and skills to build and maintain active energy storage systems.

• On-site racking and stacking of battery cells versus off site prefabrication. Onsite assembly is the way to go!

About the Author

Mike Eby

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.