Quizzes

Quizzes

May 9, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Calculating Lighting Loads 2

NEC rules on calculating inductive and LED lighting loads for circuits supplying lighting units that have ballasts, transformers, autotransformers, or LED drivers...More
Apr. 18, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Circuit Connections for Fixed Electric Heating Systems

NEC requirements for circuit connections on fixed electric heating systems...More
Apr. 4, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Pull Boxes for Fixed Electric Heating Systems

NEC requirements regarding pull boxes for fixed electric heating systems...More
Mar. 21, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Grounding Requirements for Switches 1

NEC guidelines on grounding requirements for switches...More
Mar. 6, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Snap Switches 1

NEC guidelines on snap switches...More
Feb. 21, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Definition of Patient Bed

NEC guidelines on the definition of a patient bed and when a table is considered to be a bed location...More
Feb. 7, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Name That Article

Which Article of the 2011 NEC consists of only two sections, uses the word "specific" in the title, and makes reference to seven other Articles in the Scope statement?...More
Jan. 17, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Position of Receptacle Faces

Fill in the blank with the appropriate answer. Excluding any exception(s), after installation, receptacles __________ faceplates of insulating material, and shall project a minimum of 0.015 in. from metal faceplates....More
Jan. 3, 2013

Article

Electrical Construction and Maintenance

Code Quiz: Mounting Receptacles

When mounting receptacles in boxes that are set back from the finished surface as permitted in 314.20, the receptacles shall be installed so that the mounting yoke or strap of the receptacle is _________ ....More
Dec. 20, 2012

Article

Electrical Construction and Maintenance

Code Quiz: Clearance of Live Parts 1

Fill in the blank with the appropriate answer. For field-fabricated installations using equipment operating at more than 600V, the minimum air separation between live conductors and between such conductors and adjacent grounded surfaces shall be a minimum of______ in. for an indoor, phase-to-phase application of 13.8kV. A. 12 B. 7.5 C. 7 D. 5 Answer: B...More