ECM Buyers' Guide
  

Stumped by the Code?

All questions and answers are based on the 2005 NEC.

Q. Do I need to use hospital-grade receptacles in a chiropractor's or medical examining room?

Fig. 1 Hospital-grade receptacles are not required in locations such as treatment rooms of clinics, medical and dental offices, or outpatient facilities.

A. No. Only receptacles for inpatient sleeping beds or procedure table beds used in a critical patient care area (patient bed location) must be listed as “hospital-grade” [517.18(B) and 517.19(B)(2)] (Fig. 1).

Q. Can I use low-voltage cable for 24V lighting supplied by a 1.5kVA transformer?

A. No. All wiring must be in accordance with Chapter 3 of the NEC, unless Chapters 5 through 8 modifies the general requirements [90.3]. Since there are no rules in Chapter 5 through 8 that modify the wiring method requirements for low-voltage lighting (over 100VA), you'll need to use a traditional wiring method, such as Type MC cable, EMT and wire, or where permitted, Type NM cable.

Fig. 2. There are exceptions that allow for the routing of normal wiring and emergency wiring in the same enclosure.

Q. Does the NEC require a building owner to have spare light bulbs and batteries for emergency lighting and exit signs?

A. No.

Q. What are the rules on mixing emergency circuits in the same raceway or enclosure with nonemergency circuits?

A. To ensure that a fault on the normal wiring circuits will not affect the performance of emergency wiring or equipment, all wiring from an emergency source, or emergency source distribution overcurrent protection device, to emergency loads must be kept entirely independent of all other wiring and equipment, except as permitted for [700.9(B)]: (1) wiring in transfer equipment enclosures (Fig. 2); (2) wiring supplied from two sources in exit or emergency luminaires; or (3) wiring from two sources in a common junction box, attached to exit or emergency luminaires.

Find More Code Q&As »






Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

Feb 2, 2012 7:54 PM

What's Wrong Here?

Jan 19, 2012 4:06 PM

What's Wrong Here?

Jan 5, 2012 11:53 AM

View all What's Wrong Here?

product spotlight

Labeling tool

Feb 10, 2012 7:58 AM

Labeling tool

The Rhino 4200 labeling tool features one-touch “hot keys” that quickly create and format wire/cable wraps, flags, fixed-length labels and more...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M TV

Arlington CP9000

Arlington's new 9" diameter ceiling cover plate is the neatest way to cover unused "high hat" cans. With no tools needed, installation couldn't be faster!...

Arlington Gangable Boxes

Designed for new or retrofit applications, these snap-together gangable plastic boxes eliminate the need to construct a multiple-gang steel box out of several individual ones...

Understanding NEC Requirements for Solar Photovoltaic Systems
During this session, Mike Holt will address possible conflicts or confusing NEC requirements, provide tips on proper electrical installation techniques, and discuss the dangers related to improper installations. View this On Demand Webinar!



resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues