Avoiding Landmine Repairs, Part 8

July 23, 2013
A motor overload burned open on a batch mixer, but insulation resistance testing shows no problems.

You respond to a trouble call with a batch mixer. A motor overload burned open, but insulation resistance testing shows no problems. As the mixing system is recipe-driven from the PLC, you suspect the ingredients are being added in a way that creates a thick slurry and overloads the motor.

You ask the operator if it's possible to change the recipe to avoid this problem. Unfortunately, that decision can't be made from the floor.

You leave, knowing this problem will recur. You make one more stop and then look for your supervisor to discuss the mixer problem. But she finds you first, informing you that the operator on that mixer you fixed just narrowly escaped injury and the E-stop didn't work.

No matter how diligent you are with the actual repair, the last person to work on a system is the first person suspected of leaving it in an unsafe condition. To avoid this, always test E-stops, light curtains, and similar devices on any system so equipped.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.