Teledata & fiberoptics

Included in this category are all types of telephones; auxiliaries such as modems, coil cable, CCTV/CATV cable, and LAN hardware; intercoms; alarms such as gongs and horns; and fiberoptic equipment such as cable, terminations, and splices.

A very important segment of the electrical industry involves the installation and maintenance of telecommunications systems. This equipment, while somewhat specialized, is installed using techniques similar to those used for power and lighting conductors. Termination and test methods, however, differ a great deal. To deal with this rapidly growing industry, several new standards have been established defining cabling specifications and ways in which standards-based wiring and connecting hardware should be installed. They are collectively known as the EIA/TIA Telecommunications Wiring Standards and include the following: EIA/TIA-568, -569, and -606.

Telephone equipment

Typically, telephone equipment used in residential and commercial structures is modular. Jacks, inline couplers, junction boxes, and handset coiled cord are all connected with hookup wire to form a system. However, there is more of a variation in systems used in industrial locations. Explosion proof or intrinsically safe telephone systems are required in hazardous locations. More rugged equipment is required in others. Sound-powered telephones also have wide application in maintenance operations.

Communications systems within an industrial environment may include paging systems and mobile telephones to allow vehicles and personnel to respond to dispatching calls.

Communication systems in offices

Because of the wide use of computers, today's office environments have a greatly increased requirement for telecommunications. Data must be transferred between workstations, to mainframes, and to remote locations. Local area networks (LANs) provide the means of communications within a facility. Specialized equipment such as cabling systems, jack panels, connectors, and multip in plugs have been developed to serve these networks.

Broadband network expands the capability of the LAN even further by providing video, as well as voice and data communications. It uses CATV technology and coaxial cable, along with signal splitters, amplifiers, and other similar equipment.

Hybrid equipment is available for telecom services: flush outlet plates that combine 120V receptacles,telephone jacks,and broadband connectors. Underfloor raceway systems are being expanded and barriered to route the varied cable.

Fiberoptics

Optical fiber technology is having a dramatic impact upon teledata services. Starting with the cable, this technology utilizes specialized equipment and tools. Because of the optical fiber's characteristics, pulling equipment, lubricants, and installation within ducts are different. Innerduct is used to subdivide main underground duct runs. Exclusion of water is critical, thus sealing the system is given more attention. Termination and splicing the fiber also involves the use of different equipment and fittings. Specialized distribution panels are available to convey fiberoptic-delivered signals to their destination within a facility.

New telecommunications standards

Telecommunications wiring should be properly planned and installed to assure a long and useful service life. In addition, all of the nonpower wiring in a building should be treated as a single concern that crosses architectural, structural, and electrical disciplines. These two concepts are the driving forces behind the development of a set of Electronic Industries Association/Telecommunications Industry Association (EAI/TIA) standards. The three completed standards are as follows.

* EAI/TIA-515 Commercial Building Telecommunications Wiring Standard;

* EAI/TIA-569 Commercial Building Standard for Telecommunications Pathways and Spaces; and

* EIA/TIA-570 Residential and Light Commercial Telecommunications Wiring Standard.

These standards are in full conformance with the NEC, the NESC, the Life Safety Code, and the Uniform Building Code. They do not replace other existing code.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues