Plug-and-Play Subsystem Platform

Every so often, a groundbreaking product comes along that has the potential to transform an entire industry. The Convia programmable building platform, introduced by Chicago-headquartered Convia/a Herman Miller Co., may be one such innovation. Launched in November 2006, the next-generation system is a modular, programmable infrastructure for power and data that offers plug-and-play connections for any interior light, electrical device, or control — almost any location within a commercial space without the need for hardwiring of devices or switches.

“One of the biggest issues in commercial environments and for developers is the cost of ‘tenant churn’ — that is, the turnover of space from one tenant to another or the change of space for an existing tenant as it grows or contracts,” says John Knott, president and CEO of the Noisette Co., a North Charleston, S.C.- based developer of sustainable communities that recently installed one of the systems in its 11,000-square-foot office. “Convia solves this problem by creating a framework infrastructure — either horizontal or vertical — that deploys our control, communications, and power technologies in a shielded, integrated system that allows us to basically move anything, anywhere.”

Convia's nucleus is its low-voltage communication network and protocol, which the company says allow unlimited interconnectivity between the number of lights controlled by a single switch. The system also features modular plug assemblies that carry 120V or 277V power as well as the ability to transmit data-over-power lines. In the open-grid version, plug-and-play power is distributed every 10 inches along the product's grid. All devices can be hung from the grid and are fully programmable — allowing trained and untrained users alike to install, upgrade, or relocate any electrical device. Associations between switches, sensors, and lights are done in minutes via a secure, remote-control two-button wand employing infrared technology.

“Instead of having to manually rewire lights, you point the wand at the switch and click it to change which lights are in use,” explains Knott, whose company also deployed the system in a tenant space leased by McMillan, Smith and Partners in North Charleston. “You can even change lighting patterns or preprogram an environment such as a conference room or classroom. At McMillan, Smith, and Partners, we deployed the vertical system, where walls were hung from the infrastructure with power moving through them. The product creates a high-tech, contemporary, 21st century environment.”

In development for five years, the product's major design considerations were to provide flexibility in electrical systems as well as energy management, according to Convia's President Randy Storch. “With this system, users can measure any electrical event that occurs in a space,” Storch says. “When someone flips a switch, you know which lights are on, how long they have been burning, and at what dimming level they are operating. This lets our customers calculate how to benchmark a truly efficient electrical system.”

A study commissioned by the company and performed by the Weidt Group, Minnetonka, Minn., supports this claim, concluding that an average office building using Convia programmable infrastructure would realize 6% to 30% in annual energy savings as compared to the current energy standard for buildings (ASHRAE standard 90.1-2004). The study also revealed that the product offers the ability to recoup a further 20% to 60% energy savings that are otherwise lost when implemented with traditional electric systems.

Since the launch of the device, commercial offices and retail spaces are proving to be fertile market segments for Convia, according to Storch. “We're also seeing a need for this kind of flexibility in education facilities,” he adds. “And we're starting to look into the health care industry as well.”

Made of 100% reusable components, the product is available in either an open-ceiling grid or a plenum-rated system for use in conjunction with traditional finished ceilings incorporating air-handling systems. Designed for closed or drop ceilings, the plenum-rated system is compatible with HVAC systems.

According to the company, the programmable infrastructure is comparably priced to conventional pipe and wire with junction boxes. “However, the product offers a number of other systems, including lighting control, audio/video control, and energy management,” Storch says. “So far, no one else takes an integrated approach to all of these pieces.”

For more information, visit www.convia.com.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues