OSHA Announces New National Emphasis Program on Silica

Each year, approximately 2 million American employees are exposed to crystalline silica, a hazardous form of dust. According to the Center to Protect Workers Rights (CPWR), Silver Spring, Md., silica is found in sand, rock, masonry, concrete, and some paints. Not surprisingly, construction workers have a greater chance of exposure than workers in any other industry.

To address this issue, the Occupational Safety and Health Administration (OSHA), Washington, D.C., recently established a new National Emphasis Program (NEP) aimed at work sites where employees are at risk for developing silicosis — a disabling, nonreversible, and sometimes fatal lung disease caused by inhaling a large amount of crystalline silica.

“Under this program, OSHA will work diligently to maximize the protection of employees and eliminate workplace exposures to silica-related hazards,” says Edwin G. Foulke, Jr., assistant secretary of labor for OSHA.

In addition, the following actions are recommended to reduce the risk of exposure to silica:

  • Wet down dry materials and surfaces before you work with them or before you sweep them.

  • Use local exhaust ventilation to reduce airborne dust where it originates.

  • For abrasive blasting, replace silica sand with safer materials or use safer methods.

  • When doing abrasive blasting, you need to use a type CE abrasive blasting respirator (positive pressure/pressure demand, with an APF of 1,000 or 2,000).

  • When drilling in rock that may contain silica, you may need a respirator.

  • If a respirator is needed, OSHA says you must have a full respiratory protection program.

  • Do not eat, drink, or smoke near silica.

  • Change out of your work clothes before going home.

Source: The Center to Protect Workers Rights (CPWR), Silver Spring, Md.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues