Not Without Its Faults


The proper application of circuit protective devices is crucial in the design and construction of a safe and reliable power distribution system. On the one hand, we use fuses and circuit breakers to protect electrical equipment. But when it comes to safeguarding persons from injury, ground-fault circuit interrupters (GFCIs) are the item of choice. But are these devices really providing the full-time protection everyone thinks they are? The answer may surprise you.

Pass & Seymour/Legrand first introduced the GFCI to the electrical market more than 30 years ago. Initially, the NEC only required you to install a GFCI for temporary wiring at construction sites, underwater swimming pool lights, and in dwelling unit bathrooms. But in recent years, Code requirements have expanded to include many other areas, including commercial occupancies, fountains, and swimming pools. According to the National Electrical Safety Foundation, an estimated 400 million GFCIs have since been installed in homes and most private residences, apartments, hotels, motels, and public facilities.

But recent research and testing by the National Electrical Manufacturers Association and Underwriters Laboratories (UL) indicates approximately 10% of installed GFCIs in their sample group continued to supply power without providing ground-fault protection. Another study, conducted by the American Society of Home Inspectors, revealed 19% of GFCI receptacles inspected didn't provide protection. The number of people depending on these devices makes these numbers particularly alarming.

In many cases, damage to the internal transient voltage surge suppressors that protect the GFCI sensing circuit is responsible for failure of the device. This is especially true in areas of high lightning activity, such as Florida. Installing GFCI receptacles in wet or damp locations can also expose the devices' internal circuitry to corrosion. Miswiring the device — mistakenly reversing the line and load connections — is another problem. And exposure to radio frequencies has also caused devices to fail. And the real kicker is hardly anyone ever properly tests these devices before using them.

That's why UL has revised its standard for GFCIs, UL 943. The testing organization issued a press release on July 24, setting forth the following six revisions to the standard that will become effective Jan. 1, 2003:

  • A more stringent voltage surge test to ensure the device can handle a higher surge current.

  • A new corrosion test to demonstrate greater immunity to moist conditions.

  • An operating test to verify that proper operation of the GFCI cannot be prevented by manipulation of its controls.

  • A reverse line-load miswire test that requires the device to trip when miswired.

  • An abnormal overvoltage test that requires the GFCI not become a fire or shock hazard during extreme overvoltage conditions.

  • An increased requirement for GFCIs to operate properly after exposure to conducted radio frequencies.

Although these devices have served homeowners well for the past 30 years, UL's new requirements are meant to raise the bar and make them more robust and resistant to actual field conditions. But let's not lose sight of the most important issue of all — safety. Protecting human life, like the baby shown on the cover, is what it's really all about. For an in-depth report on this topic, be sure and turn to page 24 for this month's cover story, “Leaving a Mark,” written by Senior Associate Editor Matthew Halverson.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues