advanced search

Under the Magnifying Glass

Sep 1, 2000 12:00 PM, By Marleen Canniff

Taking a close look at a motor's stator during condition-based maintenance keeps power running at capacity at this busy power plant.

When the condition-based maintenance (CBM) department at Alabama Power Company's Miller Steam Plant suggested altering the way the plant conducted preventive maintenance on its critical motors five years ago, their ideas were met with some apprehension. After all, Miller Steam Plant is a major producer of electricity for the utility, which provides service to nearly 1.3 million homes, businesses, and industries in the southern two-thirds of Alabama.

As a base-load, coal-fired plant, Miller runs its four energy-producing units at or near capacity almost 100% of the time. So, as Miller CBM Specialist Jeffery Brasher recalls, there was some concern about introducing new technology when preventive maintenance scheduling had worked for years.

According to Brasher, when it came to critical motors, the old method was to select 10 to 12 motors a year and send them out to be reconditioned, whether they showed signs of deterioration or not. Large motors (up to 7000 hp supplied by 13.8kV) were reconditioned every seven to eight years. These motors would be removed and sent to motor vendors - a very labor-intensive and costly process.

What Miller's CBM department wanted was a way to trend motor condition. "We work on percentages in condition-based maintenance," says Brasher. "We don't have time to do everything, so we have to look for innovative technologies."

The staff used vibration tests, oil analysis, laser alignment, and infrared devices to evaluate the motors, but these tools could not assure them of the electrical integrity of the motors.

"When motors run within the environment of a coal-fired plant, they operate 24-hours-a-day in coal dust and fly ash, the by-product of burned coal," says Brasher. "When the motor turns, the cooling fan (which is connected to the rotor) pulls the fly ash and coal dust right into the motor housing. We were rolling the dice on our critical motors."

To address this problem, Miller purchased a Motor Circuit Evaluator (MCE) system from PdMA Corp., of Tampa, Fla. Since he began using this 10-min test in 1995, Brasher has been extremely pleased with its performance.

The staff uses this test to check the ground wall insulation and graph leakage current in their critical motors. When the inside of a motor has buildup of contaminants, the buildup can cause current to arc, leading to degradation and eventual destruction of the motor.

"With this test, you can immediately recognize a stator's insulation condition and tell if coal dust or fly ash has contaminated the stator," says Brasher.

The most dramatic change resulting from the MCE investment is the cost savings the utility's enjoyed in reduced scheduled maintenance.

In fact, these results are so impressive that the Miller Steam Plant's CBM department has been recognized as one of the top CBM teams in the Southern Company (the utility's holding company), and the department has been visited by companies from across the United States.

Want to use this article? Click here for options!

© 2012 Penton Business Media, Inc.

---

Acceptable Use Policy blog comments powered by Disqus

Browse Back Issues Select an Issue EC&M Magazine | April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 1, 2009 December 2008 November 2008 October 1, 2008 September 2008 August 2008 July 2008 June 1, 2008 May 2008 April 2008 March 2008 February 2008 January 2008 December 2007 November 2007 October 2007 September 2007 August 2007 July 2007 June 2007 May 2007 April 2007 March 2007 February 2007 January 2007 December 2006 November 2006 October 2006 September 2006 August 2006 July 2006 June 1, 2006 May 1, 2006 April 2006 March 1, 2006 February 2006 January 2006 December 2005 November 2005 October 2005 September 2005 August 2005 July 2005 June 2005 May 2005 April 2005 March 2005 February 2005 January 2005 December 2004 November 2004 October 2004 September 2004 August 2004 July 2004 June 2004 May 2004 April 2004 March 2004 February 1, 2004 January 1, 2004 December 1, 2003 November 1, 2003 October 1, 2003 September 1, 2003 August 1, 2003 July 1, 2003 June 1, 2003 May 1, 2003 April 1, 2003 March 1, 2003 February 1, 2003 January 1, 2003 December 1, 2002 November 1, 2002 October 1, 2002 September 1, 2002 August 1, 2002 July 1, 2002 June 1, 2002 May 1, 2002 April 1, 2002 March 1, 2002 February 1, 2002 January 1, 2002 December 1, 2001 November 1, 2001 October 1, 2001 September 1, 2001 August 1, 2001 July 1, 2001 June 1, 2001 May 1, 2001 April 1, 2001 March 1, 2001 February 1, 2001 February 1, 1995 January 1, 2001 December 1, 2000 November 1, 2000 October 1, 2000 September 1, 2000 August 1, 2000 July 1, 2000 June 1, 2000 May 1, 2000 April 1, 2000 March 1, 2000 February 1, 2000 January 1, 2000 December 1, 1999 November 1, 1999 October 1, 1999 September 1, 1999 August 1, 1999 July 1, 1999 June 1, 1999 May 1, 1999 April 1, 1999 March 1, 1999 February 1, 1999 January 1, 1999 December 1, 1998 November 1, 1998 October 1, 1998 September 1, 1998 August 1, 1998 July 1, 1998 June 1, 1998 May 1, 1998 April 1, 1998 March 1, 1998 February 1, 1998 January 1, 1998 December 1, 1997 November 1, 1997 December 1, 1996 November 1, 1996 October 1, 1996 September 1, 1996 August 1, 1996 July 1, 1996 June 1, 1996 May 1, 1996 April 1, 1996 March 1, 1996 February 1, 1996 January 1, 1996 December 1, 1995 November 30, 1995 November 1, 1995 October 1, 1995 September 1, 1995 August 1, 1995 July 1, 1995 June 1, 1995 May 1, 1995 April 1, 1995 March 1, 1995

browse e-newsletters