Everyone makes mistakes. Some are just funnier than others

Everyone makes mistakes. Some are just funnier than others













Scream Work

One of our designers started a pre-job walkthrough for a relighting job at a multi-story production facility in the basement where the main disconnect switch and first set of panelboards were located. As he gave his introductory comments to a group of about 20 people, the local pressure-demand-controlled air compressor came on, effectively drowning him out. He tried to keep talking, but to no avail, so after a few minutes he finally walked over to the compressor and killed it with the main switch. He was able to continue with the walkthrough, but after reaching the second floor he realized that the building, which had been busy with machinery noise, was slowly starting to quiet down. By turning off the air compressor, he had effectively shut down the rest of the machinery once the reserve tank ran out. He stopped working for us that afternoon.
Laszlo Weress
Freeport, Texas




Shifty Lift

While working in a new high-tech office reception area that needed a circuit added in the open-bar joist ceiling next to several high-definition television monitors for product info, I located a one-man lift under the j-box location. My fellow electrician willingly jumped in and headed up to complete the install, but on the way down, the control cable for the remote somehow got pinched and shorted out, sending him on an up-and-down ride for three minutes. Each time up, he narrowly missed the 52-inch monitors. I cut the battery cables, but it was too late for my friend — no less than 20 employees in a nearby conference room had something to laugh about for the next several days.
R.J. McCoy
Brooklyn Center, Minn.

Got a story about a jobsite blunder? Send it to electrical_group@primediabusiness.com. If we publish it, we'll send you a check for $25.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues