Short Circuits

Everyone makes mistakes. Some are just funnier than others

The Melody of a Miswire

About 40 years ago, I was helping my old friend Tom change out a furnace. He was a licensed warm air mechanic, and I was a journeyman electrician. The door chime transformer had been connected to the furnace junction box because that was the only circuit in the basement that was hot at all times. As we were finishing up the job, the homeowner said, “Let me hook up the low-voltage part.” So I gave him some twist-on connectors and went ahead with the other work. When we were done, Tom said, “Go up and turn up the thermostat.” When I did, I heard the chime go “ding,” so I turned it back down — and the chime sounded again. Then I stepped out onto the porch and pushed the chime button. Tom finally called to me and said, “Okay, it came on.” I replied, “That's great, Tom, but who gets the job of standing on the porch all winter?” Immediately, we all knew what had happened and had a good laugh over the mistake.
Dwaine Munyon
Lincoln, Neb.


Stop & Go Downhill Run

While employed as an engineer at a theme park several years ago, I had occasion to enter one of the attractions to survey it for a future modification. As I entered the Alpine Ski Resort, I was greeted by a young maintenance electrician with whom I was acquainted. He approached me with a puzzled look and asked for my advice. He had been given the task of installing several wall-mounted fans in the ride's guest loading area. Armed with the proper wire, conduit, and receptacles, he had (in the true tradition of concealing all wiring) located an electrical pull box behind the themed façade, and proceeded to attach the fan receptacle circuits to the wiring inside the box. Unfortunately, when he switched the fans on they would not run at full speed. He also noted that there was a “pulsing buzz” coming from them. Thinking that he had been given defective fans, he replaced them but still had the problem. I looked at the fans and noted the frequency of the pulses. Looking up, I pointed out the relationship between these pulses and flickering lights of the themed hanging luminaires. After a few moments, “the light flickered on” in his head. He had wired the fans into the character lighting flicker-flame effect circuits.
Tom King
Kissimmee, Fla.

Got a story about a jobsite blunder? Send it to electrical.group@penton.com. If we publish it, we'll send you a check for $25.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

EV charger tester

May 25, 2012 8:26 AM

EV charger tester

The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Now Available On-Demand


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register to View On-Demand!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues