Short Circuits
Everyone makes mistakes. Some are just funnier than others
A Hole in None
About 30 years ago, one of my first assignments as a young electrical engineer was to make a test stand for some new telephone switches. The test stand included a part that was little more than a 3-inch length of round aluminum bar with a hole running through it lengthwise. Being an engineer, I made a drawing that showed the front, back, and side views of the part before proudly giving it to the machine shop for fabrication. A couple of days passed before the machinist brought the “part” back to me. After setting the drawing down and depositing a handful of aluminum shavings on top of it, he pointed to the drawing and laughed all the way back to the shop. In my haste, I had specified a 0.5-inch hole in 0.25-inch stock instead of a 0.25-inch hole in 0.5-inch tock.
William Liddie
Grand Rapids, Mich.
Head Case
On an industrial job at a log processing operation, one of my fellow electricians was always griping about how uncomfortable it was to have to wear his hard hat, and he took every opportunity — breaks, lunch, etc. — to remove it. One day he took a break under the structure of a log conveyor. He threw the hard hat to the ground and challenged anyone to make him put it back on since he was on his break and not working. Upon finishing, he stood up and promptly cracked his head on the intersection of the structural X-brace above where he had been sitting. Fortunately, he suffered only a bump on the noggin, but we never had any further complaints from him about wearing the hard hat.
Russ Hogelin
Centreville, Ala.
Got a story about a jobsite blunder? Send it to electrical_group@primediabusiness.com. If we publish it, we'll send you a check for $25.
Want to use this article? Click here for options!
© 2012 Penton Business Media, Inc.
Latest Articles
EV charger tester
May 25, 2012 8:26 AM
CFL/LED dimmer
May 24, 2012 8:48 AM
Load bank
May 23, 2012 9:33 AM
Trending Articles
Acceptable Use Policy blog comments powered by Disqus
advertisement
what's wrong here?
What's Wrong Here?
May 10, 2012 12:44 PM
View all What's Wrong Here?
What's Wrong Here
Sponsored By:
product spotlight
EV charger tester
May 25, 2012 8:26 AM
The Electrician is portable tester that verifies critical power and safety requirements of electric vehicle (EV) chargers...
View all 2012 Product Spotlights
Free Product Info
Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.



































