Grounding vs Bonding Part 1 of 12
Jan 1, 2005, By Mike Holt, NEC Consultant
Safe installations start with a basic understanding of grounding and bonding terminology...
Ground-Fault Relay Protection Schemes
Nov 15, 2004, By David Murray, IPC Resistors, Inc.
Improve your customer’s system performance by exceeding the minimum safety requirements of the NEC...
Using Signal Isolators to Reduce Ground Loop Problems
Aug 16, 2004, Edited by John A. DeDad, Editorial Director
Unwanted ground loops can cause inaccurate sensor readings by negatively affecting instrumentation signals...
Ground Fault Protection on Construction Sites
Jun 1, 2003, By John Jansen, Clare Instruments U.S., Inc.
Do you know what OSHA has to say about electrical safety testing requirements on jobsites?...
Arc Fault/Ground Fault Tester Can Take the Heat
May 1, 2003, Edited By Amy Florence Fischbach, Staff Writer
More electricians are installing AFCIs to comply with the Code, but up until now, neither the installer nor the inspector had any means available to properly test the devices....
Ground fault protection expertise found on the Web
Mar 31, 2003,
Resistance grounding specialist, IPC Resistors, Inc. has launched a revised website offering expanded content for all users, from electrical engineers...
Post Glover hosts grounding symposium
Nov 27, 2002,
Several experts from the electrical industry will be on hand to discuss the latest in grounding at the Symposium on Grounding of Industrial Power Systems,...
Connecting UPS Grounds and Neutrals
Oct 1, 2002, By Patrick Russell, P.E., EYP Mission Critical Facilities, Inc.
Your UPS is only as reliable as your grounding system....
Putting Theory into Practice When Testing Ground Electrodes
Sep 1, 2002, By Burton Brooks, President, Ground Testing Inc.
Often clouded in confusion, ground electrode testing can offer results that are valid and useful if you understand some basics....
Post Glover announces speakers for grounding symposium
Aug 5, 2002,
Post Glover Resistors, Erlanger, Ky., has finalized the list of industry expert presentations for its free Symposium on Grounding of Industrial Power...
Not Without Its Faults
Aug 1, 2002, By Michael Eby, Editor-in-Chief
The proper application of circuit protective devices is crucial in the design and construction of a safe and reliable power distribution system. On the...
Protecting Your Assets with Bonding and Grounding
Jun 1, 2002, By Joe A. Hite, RCDD/OSP Specialist, CT Communications
Your OSP system is an investment you can't afford to lose, so keeping it safe should be a high priority....
Construction Site Ground-Fault Protection
Jun 1, 2002, By Mark Lamendola, Technical Editor
GFCI protection requires extra attention in a construction environment....
Ground Testing on Asphalt
Jan 1, 2002, By Jeff Jowett, AVO International
How can you perform a ground test when you can’t drive a spike?...
NEMA releases standard on grounding rod electrodes
Dec 12, 2001,
In an attempt to establish a national standard to improve product quality as well as dimensional and physical characteristics for users of galvanized...
