NEC 310. 5 C: Identifying counductors by phase is only possible for MC conductors by using tape or other means. MC is not manufactured in red, blue 12/2, or orange/yellow 12/3
Correction: orange/yellow 12/3
Refer to 210.5(C) - Any color ungrounded conductor can be re-phased with any color (leaving whites and greens out of this) except to comply with 110.15. Phasing ungrounded conductors can happen with any size conductor (unlike 200.6 and 250.119. For grounded and grounds). By the way, SSHADE is correct see "AFC cable systems".
What you need to know?
Tweets by @ecmweb
By clicking below, I acknowledge and agree to Penton's Terms of Service
and to Penton's use of my contact information to communicate with me about Penton's or its third-party
partners' products, services, events and research opportunities. Penton's use of the information I
Sponsored Introduction Continue on to (or wait seconds) ×