identifying ungrounded conductors

2 replies [Last post]
sshade's picture
Offline
Joined: 2014-02-16

NEC 310. 5 C: Identifying counductors by phase is only possible for MC conductors by using tape or other means. MC is not manufactured in red, blue 12/2, or  orange/yellow 12/3

sshade's picture
Offline
Joined: 2014-02-16

Correction: orange/yellow 12/3

tmegger's picture
Offline
Joined: 2014-04-09

Refer to 210.5(C) - Any color ungrounded conductor can be re-phased with any color (leaving whites and greens out of this) except to comply with 110.15. Phasing ungrounded conductors can happen with any size conductor (unlike 200.6 and 250.119. For grounded and grounds). By the way, SSHADE is correct see "AFC cable systems".

Please or Register to post comments.

What you need to know?

1. Forum Rules 2. Forum Login

 

EC&M Learning Center

 


Newsletter Signup
Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×