ECM Buyers' Guide
  

Suburban Chicago College Adds Technical Education Center

Sustainability plays key role in design of this LEED facility

With an enrollment of approximately 31,000 students per semester and a 273-acre main campus, the College of DuPage (COD) ranks third among the nation's largest single-campus community colleges. To ensure it continues to meet community and student expectations, the Glen Ellyn, Ill.-based school is undergoing a $300-million renewal. Part of this upgrade includes construction of a $50-million, 177,000-sq-ft technical education center to house the architecture, automotive technology, computer-aided design, construction management, electro-mechanical technology, electronics-integrated engineering technology, HVAC/R, interior design, manufacturing technology, ornamental horticulture, and welding technology programs.

The College of DuPage in Glen Ellyn, Ill., recently opened a 177,000-sq-ft technical education center that includes an HVAC lab.

“The technical center was designed to be used as a teaching tool,” explains Jeff Leesman, P.E., LEED® AP, lead electrical engineer for Rock Island, Ill.-headquartered KJWW Engineering, consulting engineers for the project's mechanical, electrical, plumbing, fire protection, and structural & technology systems. “For example, MEP systems were purposefully left exposed in the shop areas. In classrooms and corridors, a floating ceiling grid was employed, allowing students to view the systems located above.”

In addition, the building's electronics labs are designed for hands-on demonstration. A common lab service room includes the suite's electrical connections with real-time power monitoring/metering for student interaction.

“Conduit infrastructure installed throughout the suite enables hands-on demonstration of networking,” adds Leesman. “There are even pathways to the roof for connecting satellites and antennas.”

Like many new buildings today, the technical education center incorporates various sustainable elements, including a 1,100-ton chiller plant with VFO-controlled compressors and a condensing boiler plant. Other energy-saving features include the widespread use of low-mercury T8 lamps as well as daylight/occupancy sensors and lighting controls that are integrated into a centralized building automation system.

According to Leesman, constructing the facility to LEED specifications proved to be challenging.

“The biggest obstacle KJWW faced was satisfying the programmatic requirements while meeting the client's sustainability goals,” he says. “This is because many of the technical program's space requirements go against being sustainable. Take the welding shop, for instance. This area requires light levels greater than 100 fc and extensive exhaust. To control energy usage, we equipped all 32 welding booths with an individual snorkel arm exhaust with integral task lighting and automatic arc sensing to control the dust collection system VFD.”

In addition, the building features a 30-bay automotive lab and four “drive-in” automotive classrooms, which not only required power, data, and compressed air to be supplied to each service location, but also in-floor vehicle exhaust systems, in-ground dynamometers, and in-ground auto lifts with lighting set into the floor slab to illuminate the underside of automobiles.

Another challenge included integrating flexibility into the HVAC, construction, and manufacturing labs, which KJWW overcame by installing extensive overhead electrical track busway systems that can power any piece of equipment in any location, regardless of voltage, phase, or load requirements.

“This adds to the building's sustainable goals, because it negates the need to add or remove conduit and wiring when equipment changes are made,” Leesman notes.

Despite these challenges, the COD technical education center opened on time for fall 2009 classes.

“This building is an engineer's dream,” says Leesman. “Designing and building each program's space was a project within itself.”


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

Feb 2, 2012 7:54 PM

What's Wrong Here?

Jan 19, 2012 4:06 PM

What's Wrong Here?

Jan 5, 2012 11:53 AM

View all What's Wrong Here?

product spotlight

Labeling tool

Feb 10, 2012 7:58 AM

Labeling tool

The Rhino 4200 labeling tool features one-touch “hot keys” that quickly create and format wire/cable wraps, flags, fixed-length labels and more...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M TV

Arlington CP9000

Arlington's new 9" diameter ceiling cover plate is the neatest way to cover unused "high hat" cans. With no tools needed, installation couldn't be faster!...

Arlington Gangable Boxes

Designed for new or retrofit applications, these snap-together gangable plastic boxes eliminate the need to construct a multiple-gang steel box out of several individual ones...

Understanding NEC Requirements for Solar Photovoltaic Systems
During this session, Mike Holt will address possible conflicts or confusing NEC requirements, provide tips on proper electrical installation techniques, and discuss the dangers related to improper installations. View this On Demand Webinar!



resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues