When Power Fails

Nov. 2, 2001
The owners of a 33-story office building at 75 Broad St. (which is a few blocks east of the WTC and close to the NY Stock Exchange) invested $30 million to create a technology center suitable for Wall Street-type tenants. This foresight paid off after the attack. At about 7 p.m. on September 12, Con Ed disconnected the building from the power distribution grid in order to route sufficient power to

The owners of a 33-story office building at 75 Broad St. (which is a few blocks east of the WTC and close to the NY Stock Exchange) invested $30 million to create a technology center suitable for Wall Street-type tenants. This foresight paid off after the attack. At about 7 p.m. on September 12, Con Ed disconnected the building from the power distribution grid in order to route sufficient power to other downtown buildings.

The utility was able to make this request because the building has 25 diesel engine generators for standby use, enabling the tower to remain operational when basic services fail. Occupying the 17th and 18th floors of the tower, these 800kW units are served by an 18-in diameter pipe that runs around the perimeter of one floor for fuel delivery to the engines. The pipe holds 8,000 gal of fuel, while 32,000 additional gal of fuel are stored in the subbasement.

The massive business disruptions caused by the WTC attack have brought renewed interest in standby power systems and redundant data centers in the New York metro area and elsewhere. At the same time, buildings equipped for “telco hotels” or “hubs” are getting attention. Businesses that use paper records extensively may rethink their storage methods, says Snezana Anderson, a management director of Insigna/ESG, a brokerage services company.

About the Author

Joseph R. Knisley | Lighting Consultant

Joe earned a BA degree from Queens College and trained as an electronics technician in the U.S. Navy. He is a member of the IEEE Communications Society, Building Industry Consulting Service International (BICSI), and IESNA. Joe worked on the editorial staff of Electrical Wholesaling magazine before joining EC&M in 1969. He received the Jesse H. Neal Award for Editorial Excellence in 1966 and 1968. He currently serves as the group's resident expert on the topics of voice/video/data communications technology and lighting.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...