Gypsum, lumber and plywood, paint, and plastic products among the few products to experience significant cost increases in 2012; new outlook shows most contractors expect materials costs to increase in 2013
Prices for construction materials inched down in December, closing out a year of relatively subdued changes in both materials costs and bid prices, according to an analysis of new federal figures released today by the Associated General Contractors of America. Association officials said the price decline was likely to be temporary, noting that the vast majority of contractors predict materials prices will rise in 2013.
“Moderate price swings for several materials last year gave contractors some breathing room, but future price spikes could push many firms into the red,” said Ken Simonson, chief economist for the construction trade association. “Contractors still have not recovered from the cost increases they had to absorb in 2010 and 2011.”
For the 12 months ending in December, the producer price index for all construction inputs rose 1.3%, similar to what contractors are estimated to charge for new nonresidential buildings, Simonson noted. The index for new school buildings rose 1.1%; new industrial and office construction, 1.4%; and new warehouses, 2.6%. Materials costs rose more than 5% in both 2010 and 2011, while bid prices were virtually unchanged in 2010 and rose between 2.9 and 4.8% in 2011, depending on building type, Simonson added.
The construction economist attributed the mild annual materials price increase to moderation in fuel, metals and paving prices, which offset steeper jumps in several materials used in residential building. The index for steel mill products fell 7.9% in 2012 after leaping more than 12% in both 2010 and 2011. The index for aluminum mill shapes decreased 1.6%, while copper and brass mill shapes increased 1%. Diesel prices climbed 1.8%, the smallest amount since 2008. The indexes for concrete products rose 2.4% and asphalt paving mixtures and blocks, 4.4%.
In contrast, the index for gypsum products soared 14.0%, which Simonson said reflected the demand from new apartment and home construction, along with renovations of office and retail space. Other building products with substantial price increases included lumber and plywood, 10.8%; architectural coatings, such as paint, 10.1%; insulation materials, 5.1%; and plastic construction products, 4.7%.
Association officials noted that 90% of contractors surveyed for the group’s 2013 Construction Hiring and Business Outlook predict materials prices will increase in 2013. They added that an increasing number of contractors will try to pass on some of those price increases to customers this year, noting that 29% report they will try to raise bid prices this year, compared to only 15% that raised prices in 2012.
“The days of low bids and relatively inexpensive construction costs are clearly numbered,” said Stephen E. Sandherr, the association’s chief executive officer. “While the construction industry is still facing some difficult headwinds, there is a clear sense that the industry is slowly turning a corner.”
Click here to view December 2012 PPI table.