Ecmweb 4363 705ecmscpic1
Ecmweb 4363 705ecmscpic1
Ecmweb 4363 705ecmscpic1
Ecmweb 4363 705ecmscpic1
Ecmweb 4363 705ecmscpic1

Short Circuits

May 1, 2007
Lack of Common Sense Recently, we needed to work on the towing mechanism on one of our portable emergency generators. This mechanism locks the trailer brakes, so if it's parked on a hill it won't roll away. One problem is that if you are backing the generator uphill this also locks the brakes. To overcome this hurdle we fabricated a pin that allowed us to disable the brakes when backing the unit up.

Lack of Common Sense

Recently, we needed to work on the towing mechanism on one of our portable emergency generators. This mechanism locks the trailer brakes, so if it's parked on a hill it won't roll away. One problem is that if you are backing the generator uphill this also locks the brakes. To overcome this hurdle we fabricated a pin that allowed us to disable the brakes when backing the unit up. To make this work, we needed to drill a hole in the trailer tongue, so I went to the jobsite with one of our electricians to accomplish this task. Once on site, I noticed that the electrician had brought his corded drill with him instead of his cordless. Like any good helpful engineer, I set off on a safari to find a place to plug in the drill. After a few minutes, I heard the generator start. As soon as I heard this sound, I realized that what they say about engineers and common sense is true. Needless to say, my electrician — who had a lot more common sense than me — easily found the power source needed for his drill.
Mike Shuran
Tullahoma, Tenn.


Catching the Big One

Many years ago, I worked as an apprentice maintenance electrician at a major Bay Area hospital. After completing my apprenticeship, I took another job at a place a little closer to home, but kept in contact with my buddies at the hospital. Shortly after I started my new job, I got a call from one of my old coworkers telling me about an incident that happened to the apprentice who had taken my place. The guy was pushing in a fish tape from an electrical closet to a J-box in a fan room. Unfortunately, the natural curve of the tape allowed it to clear the J-box and keep right on going. It eventually got caught up in the fan pulley. Before he could react, it had “spooled” his tape and jammed up the fan. The lesson is clear. If you don't pay attention to where you're fishing, you may catch a lot more than you counted on.
Wayne Hawkins
Santa Cruz, Calif.

Got a story about a jobsite blunder? Send it to [email protected]. If we publish it, we'll send you a check for $25.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Don't Let Burn-Through Threaten Another Data Center or Utility Project

Get the No Burn-Through Elbow eGuide to learn many reasons why Champion Fiberglass elbows will enhance your data center and utility projects today.

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.