Editorial Clarification

July 1, 2003
Joe Knisley's article Selecting Wire and Cable Management Systems that appeared in the March 2003 issue neglected to point out that certain cable tray systems require no cutting or additional fittings, and are flexible enough to be bent by hand in the field. EC&M regrets this article failed to mention all of the cable management technologies presently available on the market.

Joe Knisley's article “Selecting Wire and Cable Management Systems” that appeared in the March 2003 issue neglected to point out that certain cable tray systems require no cutting or additional fittings, and are flexible enough to be bent by hand in the field. EC&M regrets this article failed to mention all of the cable management technologies presently available on the market.

About the Author

EC&M Staff

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.