Ecmweb 3639 Eatonelevatorpanelboard
  1. content

Elevator control panelboard

Jan. 1, 2010
Eaton’s elevator control panelboard is designed to meet the stringent requirements mandated by multiple building codes

This elevator control panelboard is designed to meet the stringent requirements mandated by multiple building codes. Standard product features include: 30A to 200A, 240 VAC and 600VAC fused switch to feed the elevator; 200,000A rms short-circuit current rating; 120VAC shunt trip; control power terminals; ground termination, and 120VAC key test switch.
For more information:
www.eaton.com/ecm/idcplg?IdcService=GET_FILE&allowInterrupt=1&RevisionSelectionMethod=LatestReleased&Rendition=Primary&&dDocName=PA01417003E

About the Author

remove this

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Continue Reading

Sponsored Recommendations

Electrical Conduit for Bridges Guide

Learn about electrical conduit for bridge projects.

Strut Comparison Chart

Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

Don't Let Corrosion Disrupt Your Next Project

The Complete Corrosion eGuide for Industrial Electrical Systems will help you avoid corrosion and its effects so you can spec for success for successful project outcomes.