AFCIs Primed to Branch Out

Nov. 1, 2006
Much like the debates that arose with the introduction of the ground fault circuit interrupter (GFCI) in the early '70s, the arc fault circuit interrupter (AFCI) has followed a similar fiery path in recent years. Some engineers and industry consultants have challenged the merits of the technology. Installers have balked at the high unit price per device. Technicians have fretted over test methods

Much like the debates that arose with the introduction of the ground fault circuit interrupter (GFCI) in the early '70s, the arc fault circuit interrupter (AFCI) has followed a similar fiery path in recent years. Some engineers and industry consultants have challenged the merits of the technology. Installers have balked at the high unit price per device. Technicians have fretted over test methods and the merits of new test equipment to ensure these devices operate in the real world as designed. On the other side of the fence, supporters of the technology rally around the benefits of improved life safety and point out that all new technologies suffer growing pains. But it appears the debate on this hot topic may soon die down — if not disappear altogether.

If the recent actions of Code-Making Panel (CMP) No. 2 hold true to what's shown in the NFPA 70 Report on Proposals A2007, then AFCI requirements will move beyond the bedroom and apply to the dwelling as a whole. And like it or not, all 120V, single-phase, 15A and 20A branch circuits installed in dwelling units shall be protected by a listed AFCI, combination-type device, essentially closing the case.

Although CMP No. 2 will be meeting November 28 through December 9 to consider the public comments previously submitted on this issue, my gut feel tells me this new requirement will be part of the 2008 NEC. I highly doubt this proposal will get derailed between now and the NFPA Annual Meeting date of early June of next year. I may end up with egg on my face for saying so, but I doubt it. This change seems to be a lock from my perspective.

In fact, I think this change is just the beginning of a more widespread adoption of this technology. Just as the requirements for installation of GFCIs continues to expand in the commercial and industrial sectors, so too will those associated with AFCIs. And just as the technology has continued to improve on the GFCI front, improvements will be made on the AFCI front. The major manufacturers of these devices will drive this change as they strive to differentiate their products from their competitors. Widespread adoption of these devices will also help drive down the cost of individual units.

But what we all hope to see from these changes in the not-too-distant future is a reduction in the high number of deaths and injuries each year associated with fixed wiring systems. This is the ultimate goal of the NEC, isn't it?

For a more comprehensive review of this topic, turn to our cover story on page 34 and read what a few industry experts have to say on this proposed change. Then, drop me a note and share your thoughts on AFCIs. I'd love to hear them.

About the Author

Michael Eby

Mike received a B.S. degree in electrical engineering in 1986 and an M.S. degree in engineering management in 1994 from the University of South Florida. He is currently a member of the National Fire Protection Association (NFPA), Institute of Electrical and Electronics Engineers (IEEE), Association of Energy Engineers (AEE), and American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE).

Prior to joining EC&M as Editor-in-Chief in September 1999, Mike served as the Executive Editor of Transmission & Distribution World magazine for five years. He currently serves as the Senior Director of Content - Buildings Group in the Infrastructure & Intelligence Division at Informa. Before joining Informa, Mike held various engineering titles within the Substation and Transmission Engineering Groups at Florida Power & Light Co., Juno Beach, FL.

Mike was awarded the Southeastern Electric Exchange (SEE) Excellence in Engineering Award in 1993 and has received numerous regional and national editorial awards for his reporting and writing work in the electrical market.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.