ECM Buyers' Guide
  

Major Renovation Puts Los Angeles Theater at Center Stage

Since opening its doors in 1967, the Mark Taper Forum — better known as the Taper — has not only become a Los Angeles landmark, but is also one of America's leading resident theaters. Like an aging Hollywood actor, however, the 41-year-old structure found itself in need of cosmetic surgery. Thanks to a recent $30-million overhaul, the 30,000-square-foot building has been brought into the 21st century and is once again taking center stage in the City of Angels.

Los Angeles’ Mark Taper Forum recently underwent a $30-million renovation.

“The theater was very antiquated,” says Terry Bottorff, senior project manager for Cypress, Calif.-based Taisei Construction Corp., the project's general contractor. “It hadn't been renovated since a small refurbishment done in the late 1980s. With the exception of the structural walls, we gutted the entire inside.”

According to Bottorff, electrical installations in theaters typically prove difficult, but the design of the Taper made this restoration's challenges even more pronounced. Part of the Music Center of Los Angeles, the structure is a circular design by architect Welton Becket. In addition, the theater features a unique thrust stage that extends into the audience on three sides and is connected to the backstage area by its upstage end.

To make the theater more energy efficient, CFLs were used when feasible.

“Keep in mind this building is round, which means it has six different radius points,” notes Bottorff. “Subcontractors were hired to install the lighting control and audio systems, which was no small task. In the Taper's overhead catwalks alone, approximately 240,000 linear feet of conduit was laid. That's a little over 45 miles.”

Because the facility's various systems — including electrical, audio, sprinkler, and HVAC — follow along the catwalks on racks, the electrical contractor, Santa Fe Springs, Calif.-based CSI Electric, used 3D modeling prior to installation to ensure no obstructions or interference occurred during the installation.

“The systems had to be layered, so CSI Electric color-coded each of them to eliminate potential confusion,” explains Bottorff. “To avoid crosstalk on the audio system cables, the systems had to be separated by certain distances. This proved extremely difficult.”

Another obstacle to be overcome involved the building's emergency generator that provides backup power to not only the Taper, but to the neighboring Ahmanson Theater as well.

“We had to upsize the generator, which is located seven floors underground in a parking structure that has very little headroom,” says Bottorff. “So first we put the generator together and ran the load bank tests on it. Then, we tore it apart, took it down to the underground room in pieces, and put it back together.”

To render the 740-seat theater more energy-efficient, compact fluorescent lamps (CFLs) were used when feasible. Furthermore, lights can be operated by one person via eight computer-controlled dimmer racks that allow numerous lighting scenes to be set, depending upon the desired mood.

Despite an unanticipated and large amount of asbestos abatement that had to be performed during hours when unprotected workers weren't present, the year-long project finished on time and under budget. “I was lucky enough to see the first production in the Taper after it reopened,” says Bottorff. “This is one of those projects that, when completed, you look back and you are really proud of it.”


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

Feb 2, 2012 7:54 PM

What's Wrong Here?

Jan 19, 2012 4:06 PM

What's Wrong Here?

Jan 5, 2012 11:53 AM

View all What's Wrong Here?

product spotlight

Labeling tool

Feb 10, 2012 7:58 AM

Labeling tool

The Rhino 4200 labeling tool features one-touch “hot keys” that quickly create and format wire/cable wraps, flags, fixed-length labels and more...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M TV

Arlington CP9000

Arlington's new 9" diameter ceiling cover plate is the neatest way to cover unused "high hat" cans. With no tools needed, installation couldn't be faster!...

Arlington Gangable Boxes

Designed for new or retrofit applications, these snap-together gangable plastic boxes eliminate the need to construct a multiple-gang steel box out of several individual ones...

Understanding NEC Requirements for Solar Photovoltaic Systems
During this session, Mike Holt will address possible conflicts or confusing NEC requirements, provide tips on proper electrical installation techniques, and discuss the dangers related to improper installations. View this On Demand Webinar!



resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues